groundranger
Active · latest filing Nov 2026Residential

2204 Alexander Ave

Austin, TX 78722

Permits revise plans for two dwelling units and a rear house

Austin permit records indicate plans for two dwelling units and a one-story, two-bedroom, one-bath house at the rear of the main house at 2204 Alexander Ave. Building permit revisions were filed October 12, 2026, and a permit for a temporary 200-amp construction loop was filed November 3, 2026.

Summarized from City of Austin records · updated Nov 3, 2026

Projects
5
5 filings
Latest filing
Nov 3, 2026
since Oct 12, 2026
Largest scope
—
Listed value
—

Where this project stands

Finaled

Install a 200 amp temporary construction loop

  1. AppliedOct 27, 2026
  2. IssuedNov 3, 2026
  3. WorkNov '26 – Nov '26
  4. Final inspectionNov 5, 2026

Passed final inspection Nov 5, 2026.

1 contact on this project · 1 phone number

Permit & project history

5 projects
  1. Install a 200 amp temporary construction loop

    Install a 200 amp temporary construction loop

    City of Austin permitElectrical PermitFinal
    Owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  2. Build 1 new construction of two dwelling units joined with a covered screened porch attached carport raised terrace and uncovered wood deck. new driveway approach leading to a ribbon driveway 1/1.5 revision: permit revision narrative: this resubmittal documents three major revisions to the approved permit drawings for this residential development. 1. conditioned square footage unit 1: the total conditioned square footage for unit 1 increased to include an enclosed dining room. the screened porch from the previous design is no longer part of the project scope. there are no other permit relevant revisions to unit 1. unit 2: the floor plan layout of unit 2 has been revised. floor plan on a1.2 show updated visitable route and bathroom smoke/carbon monoxide detector locations attic access and call out square footage and ceiling heights by space. escape and rescue openings are called out in the window and door schedules on sheet a1.3. shared accessory room: introduced a new shared accessory room between unit 1 & unit 2. updated far calculations are provided on a0.1. 2. building footprint & envelope the proposed revision required minor adjustments to the building footprint & foundation. as part of the revised design the footprint of the wood deck also adjusted. updated impervious cover and total building coverage calculations are provided on a0.1. revisions to openings and new openings are shown in the updated window and door schedules on sheet a1.3. 3. fire separation between dwelling units the revised design locates a shared accessory room per r302.3.6 between unit 1 and unit 2. the function of the shared accessory room is to provide a storage space accessible from both units. the walls between the shared accessory room and dwelling units are separated per table r302.3.6 dwelling shared accessory room separation and separation requirements are vertically continuous from foundation to roof deck. structures supporting the ceiling of the shared accessory room are separated per table r302.3.6 dwelling shared accessory room separation. there is no habitable space above or below the shared accessory room. all openings in walls separating dwelling units from the shared accessory room are compliant with r302.3.6.1 opening protection. all duct penetrations shall comply with r302.3.6.2 and shall not have openings into the shared accessory room. all other penetrations shall comply with r302.3.6.3. see a0.2 fire separation & details for updated code compliance diagrams

    Build 1 new construction of two dwelling units joined with a covered screened porch attached carport raised terrace and uncovered wood deck. new driveway approach leading to a ribbon driveway 1/1.5 revision: permit revision narrative: this resubmittal documents three major revisions to the approved permit drawings for this residential development. 1. conditioned square footage unit 1: the total conditioned square footage for unit 1 increased to include an enclosed dining room. the screened porch from the previous design is no longer part of the project scope. there are no other permit relevant revisions to unit 1. unit 2: the floor plan layout of unit 2 has been revised. floor plan on a1.2 show updated visitable route and bathroom smoke/carbon monoxide detector locations attic access and call out square footage and ceiling heights by space. escape and rescue openings are called out in the window and door schedules on sheet a1.3. shared accessory room: introduced a new shared accessory room between unit 1 & unit 2. updated far calculations are provided on a0.1. 2. building footprint & envelope the proposed revision required minor adjustments to the building footprint & foundation. as part of the revised design the footprint of the wood deck also adjusted. updated impervious cover and total building coverage calculations are provided on a0.1. revisions to openings and new openings are shown in the updated window and door schedules on sheet a1.3. 3. fire separation between dwelling units the revised design locates a shared accessory room per r302.3.6 between unit 1 and unit 2. the function of the shared accessory room is to provide a storage space accessible from both units. the walls between the shared accessory room and dwelling units are separated per table r302.3.6 dwelling shared accessory room separation and separation requirements are vertically continuous from foundation to roof deck. structures supporting the ceiling of the shared accessory room are separated per table r302.3.6 dwelling shared accessory room separation. there is no habitable space above or below the shared accessory room. all openings in walls separating dwelling units from the shared accessory room are compliant with r302.3.6.1 opening protection. all duct penetrations shall comply with r302.3.6.2 and shall not have openings into the shared accessory room. all other penetrations shall comply with r302.3.6.3. see a0.2 fire separation & details for updated code compliance diagrams

    City of Austin permitBuilding PermitActive
    Owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  3. Building 2 1 story sfr 2/1 rear of main house revision: permit revision narrative: this resubmittal documents three major revisions to the approved permit drawings for this residential development. 1. conditioned square footage unit 1: the total conditioned square footage for unit 1 increased to include an enclosed dining room. the screened porch from the previous design is no longer part of the project scope. there are no other permit relevant revisions to unit 1. unit 2: the floor plan layout of unit 2 has been revised. floor plan on a1.2 show updated visitable route and bathroom smoke/carbon monoxide detector locations attic access and call out square footage and ceiling heights by space. escape and rescue openings are called out in the window and door schedules on sheet a1.3. shared accessory room: introduced a new shared accessory room between unit 1 & unit 2. updated far calculations are provided on a0.1. 2. building footprint & envelope the proposed revision required minor adjustments to the building footprint & foundation. as part of the revised design the footprint of the wood deck also adjusted. updated impervious cover and total building coverage calculations are provided on a0.1. revisions to openings and new openings are shown in the updated window and door schedules on sheet a1.3. 3. fire separation between dwelling units the revised design locates a shared accessory room per r302.3.6 between unit 1 and unit 2. the function of the shared accessory room is to provide a storage space accessible from both units. the walls between the shared accessory room and dwelling units are separated per table r302.3.6 dwelling shared accessory room separation and separation requirements are vertically continuous from foundation to roof deck. structures supporting the ceiling of the shared accessory room are separated per table r302.3.6 dwelling shared accessory room separation. there is no habitable space above or below the shared accessory room. all openings in walls separating dwelling units from the shared accessory room are compliant with r302.3.6.1 opening protection. all duct penetrations shall comply with r302.3.6.2 and shall not have openings into the shared accessory room. all other penetrations shall comply with r302.3.6.3. see a0.2 fire separation & details for updated code compliance diagrams

    Building 2 1 story sfr 2/1 rear of main house revision: permit revision narrative: this resubmittal documents three major revisions to the approved permit drawings for this residential development. 1. conditioned square footage unit 1: the total conditioned square footage for unit 1 increased to include an enclosed dining room. the screened porch from the previous design is no longer part of the project scope. there are no other permit relevant revisions to unit 1. unit 2: the floor plan layout of unit 2 has been revised. floor plan on a1.2 show updated visitable route and bathroom smoke/carbon monoxide detector locations attic access and call out square footage and ceiling heights by space. escape and rescue openings are called out in the window and door schedules on sheet a1.3. shared accessory room: introduced a new shared accessory room between unit 1 & unit 2. updated far calculations are provided on a0.1. 2. building footprint & envelope the proposed revision required minor adjustments to the building footprint & foundation. as part of the revised design the footprint of the wood deck also adjusted. updated impervious cover and total building coverage calculations are provided on a0.1. revisions to openings and new openings are shown in the updated window and door schedules on sheet a1.3. 3. fire separation between dwelling units the revised design locates a shared accessory room per r302.3.6 between unit 1 and unit 2. the function of the shared accessory room is to provide a storage space accessible from both units. the walls between the shared accessory room and dwelling units are separated per table r302.3.6 dwelling shared accessory room separation and separation requirements are vertically continuous from foundation to roof deck. structures supporting the ceiling of the shared accessory room are separated per table r302.3.6 dwelling shared accessory room separation. there is no habitable space above or below the shared accessory room. all openings in walls separating dwelling units from the shared accessory room are compliant with r302.3.6.1 opening protection. all duct penetrations shall comply with r302.3.6.2 and shall not have openings into the shared accessory room. all other penetrations shall comply with r302.3.6.3. see a0.2 fire separation & details for updated code compliance diagrams

    City of Austin permitBuilding PermitActive
    Owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  4. Cap off water and waste water

    Cap off water and waste water

    City of Austin permitPlumbing PermitFinal
    Owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  5. Total demolition of sfr1356 sq ft circa 1950

    Total demolition of sfr1356 sq ft circa 1950

    City of Austin permitBuilding PermitFinal
    Owner
    Pro
    Contractor
    Pro
    Contact
    Pro

Sources: City of Austin

Questions about 2204 Alexander Ave

What is being built at 2204 Alexander Ave?

Austin permit records describe two dwelling units and a one-story, two-bedroom, one-bath house at the rear of the main house. The plans also include shared storage between the two dwelling units.

Are there plans for more than one home at 2204 Alexander Ave?

The permits describe two dwelling units and a separate one-story house at the rear of the main house. The building permit records were revised on October 12, 2026.

What do the building permit revisions at 2204 Alexander Ave change?

The October 12, 2026 revisions update the dwelling-unit layouts and building footprint, and add a shared accessory storage room between the units. The revisions also include changes to the deck and window and door plans.

What is the temporary construction loop permit for?

Permit 2026-141543 EP, filed November 3, 2026, describes installation of a 200-amp temporary construction loop. The permit status is Final.

When were permits filed for 2204 Alexander Ave?

The building permit revisions were filed October 12, 2026, under permits 2025-137955 BP and 2025-137956 BP. A temporary electrical permit followed on November 3, 2026.

Is a restaurant being built at 2204 Alexander Ave?

The available permit descriptions concern residential construction and temporary construction power. They do not describe a restaurant.

Also being built nearby

All of 78722

More warehouses & industrial in 78722, restaurants in 78722.

Email me when a new permit is filed