2520 Weird
Dallas, TX 75212 · Bcif Oakdale Logistics Center LLC
Office remodel registered at 2520 Weir Street
A 17,000-square-foot office remodel and build-out was registered at 2520 Weir Street on March 27, 2025. The Texas Department of Licensing and Regulation lists the project as new construction and its status as inspection complete, with an estimated project cost of $2.5 million.
Summarized from Texas Department of Licensing and Regulation records · updated Mar 27, 2025
- Projects
- 1
- 1 filings
- Latest filing
- Mar 27, 2025
- since Mar 27, 2025
- Largest scope
- 17,000 sf
- Estimated cost
- $2.5M
- state registration
Where this project stands
Inspected · closing out2520 Weir
17,000 sq ft · $2.5M est.
- RegisteredMar 27, 2025
- Plan review
- ConstructionApr '25 – Aug '25
- Inspected
- Closednow
The building is substantially done. Move-in, fit-out and service work usually follow.
4 contacts on this project · 3 phone numbers
Permit & project history
1 projectOffice remodel/build out — oakdale logistics center
TDLR project registrationNew ConstructionInspection Complete17,000 sq ft$2.5M est.- Project #
- TABS2025015220
- Tenant / owner
- 2520 Weir
- Design firm
- Pro
- Contact
- Pro
Sources: Texas Department of Licensing and Regulation
Questions about 2520 Weird
What is being built at 2520 Weir Street in Dallas?
A Texas Department of Licensing and Regulation registration describes a 17,000-square-foot office remodel and build-out at the Oakdale Logistics Center. The registration lists the project as new construction.
When was the office project at 2520 Weir Street permitted?
The project was registered on March 27, 2025. Its TDLR project number is TABS2025015220.
How large is the 2520 Weir Street project?
The TDLR registration lists the project at 17,000 square feet.
How much will the 2520 Weir Street project cost?
The applicant's estimated cost for the project is $2.5 million, according to the TDLR registration.
Is construction complete at 2520 Weir Street?
The TDLR registration lists the project's status as inspection complete.
What is happening at Oakdale Logistics Center in Dallas?
A 17,000-square-foot office remodel and build-out was registered at 2520 Weir Street, the address associated with Oakdale Logistics Center. The registration was filed March 27, 2025.
Also being built nearby
All of 75212- 2520 Weir Street · Bcif Oakdale Logistics Center LLCJul 17, 2025Mockingbird food group ti — new construction — the proposed project is a 90,367 sq ft improvement in an existing 318,260 square foot shell industrial facility in dallas, tx. improvements include adding 7,767 sq ft of office spaces, 26,019 sq ft of food packaging areas, and 49,453 sq ft of dry, freezer
- 2520 Weir StOct 7, 2026Gas meter release
- 5101 Hiawatha StSep 17, 2025Pedestal type service for city street lighting · 248 m away
- 2518 Chalk Hill RdJul 6, 2026Replace existing txv and filter drier, recover system, pressure-test, evacuate, and recharge with 9 lbs r-22, relocate one 12" supply duct branch from hallway into room by tapping existing supply plenum and installing crosstie splitter · 250 m away
- 2703 Chalk Hill RdOct 27, 2026Clean and show, we are trying to show property off to new tenants · 326 m away
- 2606 Ingersoll StJul 16, 2026Conduit pulled of wall cause broken street pole · 349 m away
- 2614 Ingersoll StSep 28, 2026Install new hvac · 351 m away
- 2626 Ingersoll StOct 3, 2025922 sq ft reset reshim area using 1/4’’ thick steel shims, (1) 24x24x24” spread footing with precast blocks · 356 m away
- 2638 Ingersoll StOct 9, 2025Nsfaa-addition existing porch will be extending , no electrical will be done · 361 m away
- 4960 Singleton BlvdOct 22, 2025Repair gas leak · 393 m away
- 2435 Ingersoll StOct 27, 2025For the installation of 34 rooftop solar panels with 2 batteries · 400 m away
- 5000 Singleton BlvdJun 10, 2025Install new concrete pad for 750kva utility transformer. install new 1200amp 277/480v 3ph4w service feeder from transformer to new mdp. install new 1,200amp 277/480v 3ph4w mdp with gfci main breaker. new mdp will feed new equipment and re-feed existing main electrical panel. install grounding for new electrical service. install new 600amp 480v 3-phase circuit to feed new shredder equipment. install control wiring for equipment per manufacturer drawings · 405 m away
More offices in 75212.