groundranger
Active · latest filing Nov 2026Residential

3221 San Paula Ave

Dallas, TX 75228

Home interior remodel and new office space at 3221 San Paula Ave

Permits indicate an interior remodel at 3221 San Paula Ave, including removal of load-bearing walls between the living room and kitchen and a new partition to create an office space. The alteration permit was filed September 3, 2025, and a related electrical permit was filed October 23, 2025. The project does not add square footage.

Summarized from City of Dallas records · updated Nov 16, 2026

Projects
3
3 filings
Latest filing
Nov 16, 2026
since Nov 16, 2026
Largest scope
—
Listed value
—

Permit & project history

3 projects
  1. Sewer replacement (kitchen & bathroom)

    Sewer replacement (kitchen & bathroom)

    City of Dallas permitResidential Plumbing Permit
    Record
    RES-PLM-26-012458
    Owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  2. Existing wiring was not touched & modified. only removed electrical wires that were not being used & wires that were affected in the removal of walls. included 4 switches & 2 outlets being eliminated. the 4 switches were relocated. everything was left since it was existing

    Existing wiring was not touched & modified. only removed electrical wires that were not being used & wires that were affected in the removal of walls. included 4 switches & 2 outlets being eliminated. the 4 switches were relocated. everything was left since it was existing

    City of Dallas permitResidential Electrical Permit
    Record
    RES-ELC-25-003967
    Owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  3. Nsfaa-project overview:removal of existing load-bearing walls between the living room and kitchen to create an open floor plan. installation of engineered structural headers according to stamped structural engineering plans to maintain load support.interior wall addition:- installation of a new non-load-bearing wall to divide the open living area and create an office space.- exact location and dimensions may be finalized after the main walls are removed, but the wall will comply with dallas building code for non-load-bearing partitions.- no additional square footage is being added; building footprint remains unchanged.trade work:-any existing electrical wiring, outlets, switches, or fixtures discovered in the removed walls will be relocated by a licensed electrician under a separate electrical permit.- any existing hvac ductwork or vents in the removed walls will be relocated by a licensed mechanical contractor under a separate mechanical permit.- plumbing is not expected; separate permit will be obtained if discovered.project limitations:- work is limited to interior layout modification and the addition of one non-load-bearing partition wall.- no major finish upgrades (cabinets, flooring, or lighting) are included in this permit scope.inspections:-structural/framing inspection after header installation- framing inspection for new non-load-bearing wall (if built before drywall)- final inspection after all work is completed and trade permits are closed

    Nsfaa-project overview:removal of existing load-bearing walls between the living room and kitchen to create an open floor plan. installation of engineered structural headers according to stamped structural engineering plans to maintain load support.interior wall addition:- installation of a new non-load-bearing wall to divide the open living area and create an office space.- exact location and dimensions may be finalized after the main walls are removed, but the wall will comply with dallas building code for non-load-bearing partitions.- no additional square footage is being added; building footprint remains unchanged.trade work:-any existing electrical wiring, outlets, switches, or fixtures discovered in the removed walls will be relocated by a licensed electrician under a separate electrical permit.- any existing hvac ductwork or vents in the removed walls will be relocated by a licensed mechanical contractor under a separate mechanical permit.- plumbing is not expected; separate permit will be obtained if discovered.project limitations:- work is limited to interior layout modification and the addition of one non-load-bearing partition wall.- no major finish upgrades (cabinets, flooring, or lighting) are included in this permit scope.inspections:-structural/framing inspection after header installation- framing inspection for new non-load-bearing wall (if built before drywall)- final inspection after all work is completed and trade permits are closed

    City of Dallas permitResidential Alteration Addition Permit
    Record
    RES-ALT-ADD-25-000784
    Owner
    Pro
    Contractor
    Pro
    Contact
    Pro

Sources: City of Dallas

Questions about 3221 San Paula Ave

What is being built at 3221 San Paula Ave?

Permits describe an interior remodel that opens the living room and kitchen and adds a partition for an office space. The alteration permit, RES-ALT-ADD-25-000784, was filed September 3, 2025.

Is a new office being built at 3221 San Paula Ave?

The September 3, 2025, permit describes a new interior wall to divide the open living area and create an office space. It does not describe a separate building or added square footage.

Will the project add square footage?

No. Permit RES-ALT-ADD-25-000784 says the work is limited to interior layout changes and the building footprint will remain unchanged.

When were permits filed for 3221 San Paula Ave?

The residential alteration permit was filed September 3, 2025. A residential electrical permit, RES-ELC-25-003967, was filed October 23, 2025.

What electrical work is planned at the address?

The October 23, 2025, electrical permit describes removing unused or affected wiring and relocating four switches. It also lists two outlets being eliminated.

Is a restaurant opening at 3221 San Paula Ave?

The records provided describe residential interior alterations and electrical work, not a restaurant opening.

Also being built nearby

All of 75228
Get alerts for 3221 San Paula Ave