groundranger
Active · latest filing Oct 2026Commercial

6050 Melody Ln

Dallas, TX 75231

Permits cover repairs to fire-damaged apartment units

City of Dallas permits filed October 7–9, 2026, cover plumbing remodels in fire-damaged apartment units at 6050 Melody Ln. One permit description also mentions a full bath and kitchen remodel. The records describe repairs to existing units, not construction of a new building.

Summarized from City of Dallas records · updated Oct 9, 2026

Projects
30
30 filings
Latest filing
Oct 9, 2026
since May 28, 2025
Largest scope
—
Listed value
—

Permit & project history

30 projects
  1. Plumbing remodel for burnt apartments. unit 330

    Plumbing remodel for burnt apartments. unit 330

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003947
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  2. Plumbing remodel for burnt units

    Plumbing remodel for burnt units

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003945
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  3. Remodel for burnt apartment unit 333

    Remodel for burnt apartment unit 333

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003957
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  4. Remodel for burnt apartments unit 332

    Remodel for burnt apartments unit 332

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003956
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  5. Remodel for plumbing for burnt apartments unit 331

    Remodel for plumbing for burnt apartments unit 331

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003955
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  6. Plumbing remodel for burnt units

    Plumbing remodel for burnt units

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003943
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  7. Remodel for burned apartment

    Remodel for burned apartment

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003941
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  8. Plumbing remodel for burnt units

    Plumbing remodel for burnt units

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003944
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  9. Remodel plumbing for burned units

    Remodel plumbing for burned units

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003942
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  10. Remodel for permit ~com-alt-add-26-001271

    Remodel for permit ~com-alt-add-26-001271

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003930
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  11. Remodel for burnt units, 12 units total

    Remodel for burnt units, 12 units total

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003928
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  12. Work performed is for burnt apartments. remodel will consist of full bath and kitchen

    Work performed is for burnt apartments. remodel will consist of full bath and kitchen

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003929
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  13. ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002520
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  14. Scope of workfurnish and install one new 2-ton hvac system.remove existing equipment as required and prepare the area for the new installation.furnish and install new copper refrigerant line sets from the indoor unit to the outdoor condenser.insulate refrigerant suction piping as required.connect the new system to the existing electrical, drain, and duct systems where applicable.partially repair existing flexible ductwork where damaged, disconnected, crushed, or restricting airflow.reconnect and properly secure repaired flex ducts to improve airflow and system performance.seal duct connections as needed to help prevent air leakage.evacuate and pressure-test the refrigerant piping before startup.start up and test the new hvac system to verify proper operation, airflow, and cooling performance.remove installation-related debris and leave the work area clean upon completion

    Scope of workfurnish and install one new 2-ton hvac system.remove existing equipment as required and prepare the area for the new installation.furnish and install new copper refrigerant line sets from the indoor unit to the outdoor condenser.insulate refrigerant suction piping as required.connect the new system to the existing electrical, drain, and duct systems where applicable.partially repair existing flexible ductwork where damaged, disconnected, crushed, or restricting airflow.reconnect and properly secure repaired flex ducts to improve airflow and system performance.seal duct connections as needed to help prevent air leakage.evacuate and pressure-test the refrigerant piping before startup.start up and test the new hvac system to verify proper operation, airflow, and cooling performance.remove installation-related debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002518
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  15. ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002528
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  16. ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002527
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  17. ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002526
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  18. ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002525
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  19. ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002524
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  20. ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002523
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  21. ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002522
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  22. ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    ### scope of work- furnish and install **new hvac units** as specified for the project.- furnish and install **new copper refrigerant line sets** between the indoor and outdoor equipment.- properly insulate and secure all new refrigerant piping.- remove existing flex ductwork as required and install **new flexible ductwork** throughout the designated areas.- furnish and install **new register boots** for the new duct system.- connect new flex ducts to the register boots and hvac equipment/plenums as required.- seal and secure all duct connections to minimize air leakage and provide proper airflow.- connect equipment to existing electrical, condensate drain, gas, and control connections where applicable.- pressure test, evacuate, and prepare the new refrigerant piping for operation.- start up and test the new hvac systems to verify proper cooling, airflow, and system operation.- remove installation debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002521
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  23. Scope of workfurnish and install one new 2-ton hvac system.remove existing equipment as required and prepare the area for the new installation.furnish and install new copper refrigerant line sets from the indoor unit to the outdoor condenser.insulate refrigerant suction piping as required.connect the new system to the existing electrical, drain, and duct systems where applicable.partially repair existing flexible ductwork where damaged, disconnected, crushed, or restricting airflow.reconnect and properly secure repaired flex ducts to improve airflow and system performance.seal duct connections as needed to help prevent air leakage.evacuate and pressure-test the refrigerant piping before startup.start up and test the new hvac system to verify proper operation, airflow, and cooling performance.remove installation-related debris and leave the work area clean upon completion

    Scope of workfurnish and install one new 2-ton hvac system.remove existing equipment as required and prepare the area for the new installation.furnish and install new copper refrigerant line sets from the indoor unit to the outdoor condenser.insulate refrigerant suction piping as required.connect the new system to the existing electrical, drain, and duct systems where applicable.partially repair existing flexible ductwork where damaged, disconnected, crushed, or restricting airflow.reconnect and properly secure repaired flex ducts to improve airflow and system performance.seal duct connections as needed to help prevent air leakage.evacuate and pressure-test the refrigerant piping before startup.start up and test the new hvac system to verify proper operation, airflow, and cooling performance.remove installation-related debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002519
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  24. Scope of workfurnish and install one new 2-ton hvac system.remove existing equipment as required and prepare the area for the new installation.furnish and install new copper refrigerant line sets from the indoor unit to the outdoor condenser.insulate refrigerant suction piping as required.connect the new system to the existing electrical, drain, and duct systems where applicable.partially repair existing flexible ductwork where damaged, disconnected, crushed, or restricting airflow.reconnect and properly secure repaired flex ducts to improve airflow and system performance.seal duct connections as needed to help prevent air leakage.evacuate and pressure-test the refrigerant piping before startup.start up and test the new hvac system to verify proper operation, airflow, and cooling performance.remove installation-related debris and leave the work area clean upon completion

    Scope of workfurnish and install one new 2-ton hvac system.remove existing equipment as required and prepare the area for the new installation.furnish and install new copper refrigerant line sets from the indoor unit to the outdoor condenser.insulate refrigerant suction piping as required.connect the new system to the existing electrical, drain, and duct systems where applicable.partially repair existing flexible ductwork where damaged, disconnected, crushed, or restricting airflow.reconnect and properly secure repaired flex ducts to improve airflow and system performance.seal duct connections as needed to help prevent air leakage.evacuate and pressure-test the refrigerant piping before startup.start up and test the new hvac system to verify proper operation, airflow, and cooling performance.remove installation-related debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002516
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  25. Scope of workfurnish and install one new 2-ton hvac system.remove existing equipment as required and prepare the area for the new installation.furnish and install new copper refrigerant line sets from the indoor unit to the outdoor condenser.insulate refrigerant suction piping as required.connect the new system to the existing electrical, drain, and duct systems where applicable.partially repair existing flexible ductwork where damaged, disconnected, crushed, or restricting airflow.reconnect and properly secure repaired flex ducts to improve airflow and system performance.seal duct connections as needed to help prevent air leakage.evacuate and pressure-test the refrigerant piping before startup.start up and test the new hvac system to verify proper operation, airflow, and cooling performance.remove installation-related debris and leave the work area clean upon completion

    Scope of workfurnish and install one new 2-ton hvac system.remove existing equipment as required and prepare the area for the new installation.furnish and install new copper refrigerant line sets from the indoor unit to the outdoor condenser.insulate refrigerant suction piping as required.connect the new system to the existing electrical, drain, and duct systems where applicable.partially repair existing flexible ductwork where damaged, disconnected, crushed, or restricting airflow.reconnect and properly secure repaired flex ducts to improve airflow and system performance.seal duct connections as needed to help prevent air leakage.evacuate and pressure-test the refrigerant piping before startup.start up and test the new hvac system to verify proper operation, airflow, and cooling performance.remove installation-related debris and leave the work area clean upon completion

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-002517
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  26. Electrical portion of the rebuild for units 132,133,233,333,232,332

    Electrical portion of the rebuild for units 132,133,233,333,232,332

    City of Dallas permitCommercial Electrical Permit
    Record
    COM-ELC-26-003542
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  27. Mcr the meps are for the whole building f. framing and meps are for units 132,133,233,333,232,332.building f at 6050 melody lane, dallas, tx 75231 is burn out fire on the third floor. we are not changing any structural, we are replacing the roof and doing interior remodeling of the burn units such as flooring, drywall, paint, etc. this is a burn out fire building.repair fire damage only, bring back to its original condition, no layout or structural changes allowed -gc must call and pass framing inspection prior to cover. all work subject to field inspector approval

    Mcr the meps are for the whole building f. framing and meps are for units 132,133,233,333,232,332.building f at 6050 melody lane, dallas, tx 75231 is burn out fire on the third floor. we are not changing any structural, we are replacing the roof and doing interior remodeling of the burn units such as flooring, drywall, paint, etc. this is a burn out fire building.repair fire damage only, bring back to its original condition, no layout or structural changes allowed -gc must call and pass framing inspection prior to cover. all work subject to field inspector approval

    City of Dallas permitCommercial Alteration Addition Permit
    Record
    COM-ALT-ADD-26-001271
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  28. Temporary pole

    Temporary pole

    City of Dallas permitResidential Electrical Permit
    Record
    RES-ELC-25-000414
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  29. Remodel due to fire damage, no layout changes

    Remodel due to fire damage, no layout changes

    City of Dallas permitBuilding (BU) Multi Family Renovation$1
    Record
    2005051049
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  30. Foundation repair

    Foundation repair

    City of Dallas permitBuilding (BU) Multi Family Alteration$10K
    Record
    1909236015
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro

Sources: City of Dallas

Questions about 6050 Melody Ln

What is being built at 6050 Melody Ln in Dallas?

Recent City of Dallas permits describe plumbing remodels in fire-damaged apartment units. They do not indicate that a new building is being constructed.

What work is planned at 6050 Melody Ln?

Permits filed October 7–9, 2026, describe plumbing work in burned apartment units. One description says the remodel includes a full bath and kitchen.

When were permits filed for 6050 Melody Ln?

The latest listed permits were filed October 9, 2026. Related plumbing permits were also filed October 7 and 8.

Are the permits for fire-damaged apartments at 6050 Melody Ln?

Yes. The permit descriptions refer to burned or burnt apartment units and plumbing remodels. One permit, COM-PLM-26-003929, mentions a full bath and kitchen.

How many City of Dallas records are listed for 6050 Melody Ln?

The fact sheet lists 28 records, with filings spanning May 28, 2025, through October 9, 2026.

Also being built nearby

All of 75231

More apartments & multifamily in 75231, restaurants in 75231.

Get alerts for 6050 Melody Ln