501 W Chapin St
Edinburg, TX 78541 · Azteca Milling LP
Azteca Milling registers 1,039-square-foot break room addition
A 1,039-square-foot break room addition is planned for the existing building at 501 W Chapin St in Edinburg. The project was registered with TDLR on July 24, 2025; the applicant’s estimated project cost is $387,000.
Summarized from Texas Department of Licensing and Regulation records · updated Jul 24, 2025
- Projects
- 1
- 1 filings
- Latest filing
- Jul 24, 2025
- since Jul 24, 2025
- Largest scope
- 1,039 sf
- Estimated cost
- $387K
- state registration
Where this project stands
Finishing up · inspection nextBreak Room Addition
1,039 sq ft · $387K est.
- RegisteredJul 24, 2025
- Plan review
- ConstructionJul '25 – Jan '26
- Inspectednow
- Closed
Scheduled to finish Jan 28, 2026; the state inspection hasn't been filed yet.
4 contacts on this project · 3 phone numbers
Permit & project history
1 project1039 sq ft will be added to the existing building. foundation for new addition, framing new walls, new roof, electrical, plumbing, mechanical work, paint, tile work. — azteca milling
TDLR project registrationAdditions to Existing BuildingReview Complete1,039 sq ft$387K est.- Project #
- TABS2025024335
- Tenant / owner
- Break Room Addition
- Design firm
- Pro
- Contact
- Pro
Sources: Texas Department of Licensing and Regulation
Questions about 501 W Chapin St
What is being built at 501 W Chapin St?
A 1,039-square-foot break room addition is planned for the existing Azteca Milling building. TDLR registration TABS2025024335 was filed July 24, 2025.
What is being built near Azteca Milling in Edinburg?
The TDLR registration describes a break room addition at Azteca Milling’s address, 501 W Chapin St. The addition is planned to be 1,039 square feet.
Is this a new building or an addition?
The project is an addition to an existing building, not a standalone new building. The registration lists it as an addition to an existing building.
When was the break room addition registered?
The project was registered with TDLR on July 24, 2025. Its registration number is TABS2025024335, and its status is listed as Review Complete.
How much is the Azteca Milling addition expected to cost?
The TDLR registration lists an applicant-estimated project cost of $387,000. This is an estimate, not a confirmed final cost.
What work is planned for the addition at 501 W Chapin St?
The registration describes foundation work, new framing and a roof, plus electrical, plumbing, mechanical, painting and tile work.