1614 S Montreal Ave
Dallas, TX 75208
Permit filed for a 50-gallon water heater at Dallas home
A residential plumbing permit for a 50-gallon water heater at 1614 S Montreal Ave was filed on July 20, 2026. The City of Dallas record is permit RES-PLM-26-007473.
Summarized from City of Dallas records · updated Jul 20, 2026
- Projects
- 1
- 1 filings
- Latest filing
- Jul 20, 2026
- since Jul 20, 2026
- Largest scope
- —
- Listed value
- —
Permit & project history
1 projectSources: City of Dallas
Questions about 1614 S Montreal Ave
What is being installed at 1614 S Montreal Ave?
A City of Dallas residential plumbing permit describes a 50-gallon water heater. The permit, RES-PLM-26-007473, was filed July 20, 2026.
When was the water heater permit filed at 1614 S Montreal Ave?
The permit was filed on July 20, 2026.
What is permit RES-PLM-26-007473 for?
It is a residential plumbing permit for a 50-gallon water heater at 1614 S Montreal Ave in Dallas.
Is a new home being built at 1614 S Montreal Ave?
The available City of Dallas record is for a 50-gallon water heater, not a new home construction project.
Who issued the permit for 1614 S Montreal Ave?
The permit record is from the City of Dallas and is dated July 20, 2026.
Also being built nearby
All of 75208- 1530 S Montreal AveDec 7, 2020Remodel existing plumbing · 86 m away
- 1523 S Montreal AveJan 28, 2026Gas line repair in the yard · 94 m away
- 1510 S Montreal AveSep 25, 2026Residential roof replacement · 105 m away
- 1602 Hollywood AveSep 10, 2026Gas water heater replacement · 125 m away
- 1611 Hollywood AveMay 21, 2025Remove and replace shingles on house and garage · 140 m away
- 1619 Hollywood AveOct 1, 2020Foundation repair · 144 m away
- 1623 Hollywood AveJan 11, 202619 squares (shingles) will be removed and replaced.no decking wll be replaced.1674 surface area of the roof.material: gaf armorshield class 4 shingle. color: weathered wood · 147 m away
- 1516 S Oak Cliff BlvdMay 27, 2026Install pressure reducing valve on main water supply to residence · 149 m away
- 1635 Hollywood AveJul 7, 2026Nsfaa removal of existing concrete patio. replace with wood plank and wood construction support. extend patio aproxmentle 36" towards curb. patio is on front of house · 154 m away
- 1510 Hollywood AveSep 25, 2025Install up to 16 seer2 single-stage condenser · 158 m away
- 2030 Elmwood BlvdMar 30, 2026No work performed neighbour's house caught fire and caught their garage on fire oncor took their meter and wanted them to have a permit pulled and a inspection done. our tech said there is no fire damage to the electrical · 206 m away
- 2034 Elmwood BlvdApr 20, 2026This recommended option includes a complete upgrade of the home’s electrical service to restore power in a safe, reliable, and fully code-compliant manner following fire damage to the existing overhead service.work to be performed includes removal of the damaged and non-compliant existing service equipment, including the current seu service conductors and zinsco panel.installation of a new 200-amp electrical service will be performed in accordance with current code and utility requirements. this includes installation of a rigid, through-the-roof service mast as required by oncor’s most recent service standards to allow for reconnection of power.a new 200-amp outdoor-rated main breaker panel will be installed to replace the existing zinsco panel, bringing the system up to current safety standards and meeting city of dallas requirements.this option includes installation of a 36ka whole-home surge protector, providing protection for the home’s electrical system and appliances against common voltage spikes and surges.a full grounding system will be installed to meet current nec requirements. this includes proper grounding electrode installation and bonding of the electrical system to ensure safety and compliance.additionally, we will install three wireless interconnected smoke detectors to improve life safety within the home. these units will communicate with each other to provide full-home notification in the event of smoke or fire detection.all work will be performed under a city of dallas electrical permit. the installation will be inspected and must pass inspection before the utility provider (oncor) will reconnect power to the home.applicable nec code references:nec 230.50 – protection against physical damagenec 230.54 – overhead service locations (service mast requirements)nec 230.70 – service disconnect requirementsnec 250.50 – grounding electrode systemnec 250.53 – grounding electrode installationnec 285 – surge protective devicesnec 408.36 – overcurrent protectionnec 110.12 – mechanical execution of worknec 210.12 / 210.52 – general circuit & safety requirements (as applicable)additional notes:existing seu service and zinsco panel will be removed and replaced as required for compliance.rigid mast service is required by oncor for reconnection.all work must pass city of dallas inspection prior to utility reconnection.coordination with oncor will be required for final re-energization.power will remain off until all work is completed, inspected, and approved.change order and scope addendum:any changes to the outlined scope of work, including unforeseen conditions, limited or restricted access, or scheduling constraints, may require a change order. any additional work will be discussed and approved by the customer prior to proceeding · 207 m away