10333 Denton Dr
Dallas, TX 75220
Rooftop solar panels permitted at 10333 Denton Dr
Permits indicate rooftop solar panels are being installed on an existing commercial building at 10333 Denton Dr. The City of Dallas issued a commercial solar permit on December 1, 2025, and a commercial electrical permit on December 2, 2025.
Summarized from City of Dallas records · updated Dec 2, 2025
- Projects
- 3
- 3 filings
- Latest filing
- Dec 2, 2025
- since Dec 1, 2025
- Largest scope
- —
- Listed value
- —
Permit & project history
3 projectsSources: City of Dallas
Questions about 10333 Denton Dr
What is being built at 10333 Denton Dr?
City of Dallas permits indicate rooftop solar panels are being installed on an existing commercial building. The permits are COM-SOLAR-25-000028 and COM-ELC-25-003419.
When was the solar project at 10333 Denton Dr permitted?
The commercial solar permit was filed December 1, 2025, and the commercial electrical permit was filed December 2, 2025.
Is a new building being built at 10333 Denton Dr?
The permit descriptions refer to rooftop solar panels on an existing commercial building, not construction of a new building.
What are the permit numbers for the solar panels at 10333 Denton Dr?
The City of Dallas records list solar permit COM-SOLAR-25-000028, dated December 1, 2025, and electrical permit COM-ELC-25-003419, dated December 2, 2025.
What's being installed near 2846 Storey?
City permits indicate rooftop solar panels are being installed at 10333 Denton Dr, about 480 meters from 2846 Storey at 2846 Storey Lane.
Also being built nearby
All of 75220- 2814 Nagle StJan 5, 2021Permanent electrical service · 130 m away
- 10221 Denton DrJan 9, 2026Gas test · 222 m away
- 10220 Harry Hines BlvdNov 4, 2020Gas relay or repair with test · 226 m away
- 2828 Lombardy LnOct 23, 2025Replacement of existing furnace · 233 m away
- 10217 Harry Hines BlvdOct 28, 2026Proposed permanent installation of four (4) 40-foot shipping containers at the existing commercial property located at 10217 harry hines boulevard, dallas, texas.three (3) containers will be positioned together and utilized for permanent refrigerated cold storage in connection with existing business operations. the fourth (4th) container will be located separately on the property and utilized for mechanical equipment, tools, and general maintenance supply storage.the containers will be installed in the locations indicated on the proposed site plan. the project does not include any modifications or additions to the existing principal building. all proposed installations will be subject to applicable city of dallas building, electrical, fire safety, and site requirements · 237 m away
- 10333 Harry Hines BlvdSep 22, 2020Gas test · 297 m away
- 2911 Lombardy LnJul 10, 2026Electrical upgrades 200 amp to 400 amp · 330 m away
- 2927 Lombardy LnDec 16, 2020Install type i vent-a-hood · 344 m away
- 10430 Harry Hines BlvdDec 24, 2025Remove existing roof, repair rotted decking as needed and install new roofing material to match existing roof · 367 m away
- 2960 Lombardy LnSep 16, 2026Wrecking the building structure inits entirety · 369 m away
- 2990 Lombardy LnSep 23, 2025Electrical no work · 401 m away
- 10429 Harry Hines BlvdAug 12, 2025Areas of existing metal r-panel are deteriorating. areas of existing standing seam panels are deteriorating. furnish and install a layer of 1.5" eps insulation. this layer of insulation will be cut to fit the existing panel and loose laid directly into the r-panel flutes on the main roof. furnish and install tapered insulation crickets in the area of internal gutter encapsulation on the main roof. furnish and install a layer of 3" eps insulation. this layer of insulation will be pre-cut to fit the existing panel profile and loose laid directly into the trap panel flutes on the upper roof only. furnish and install a layer of 1/4" dexcell cover board. this layer of cover board will be mechanically attached to the existing panel utilizing fm global approved 3" plates and fasteners applied to the main and upper roof. furnish and install a 60mil tpo roof system over the prepared surface utilizing purlin fasteners and induction welding plates. the tpo membrane seams will be overlapped a minimum of 5", then hot air welded together · 420 m away
More solar installs in 75220.