10429 Harry Hines Blvd
Dallas, TX 75220
Roof replacement permitted at 10429 Harry Hines Blvd
A commercial roofing permit at 10429 Harry Hines Blvd covers work on the existing building’s main and upper roofs. The City of Dallas issued the permit on August 12, 2025. The work description calls for insulation, cover board and a 60-mil TPO roof system.
Summarized from City of Dallas records · updated Aug 12, 2025
- Projects
- 1
- 1 filings
- Latest filing
- Aug 12, 2025
- since Aug 12, 2025
- Largest scope
- —
- Listed value
- —
Permit & project history
1 projectAreas of existing metal r-panel are deteriorating. areas of existing standing seam panels are deteriorating. furnish and install a layer of 1.5" eps insulation. this layer of insulation will be cut to fit the existing panel and loose laid directly into the r-panel flutes on the main roof. furnish and install tapered insulation crickets in the area of internal gutter encapsulation on the main roof. furnish and install a layer of 3" eps insulation. this layer of insulation will be pre-cut to fit the existing panel profile and loose laid directly into the trap panel flutes on the upper roof only. furnish and install a layer of 1/4" dexcell cover board. this layer of cover board will be mechanically attached to the existing panel utilizing fm global approved 3" plates and fasteners applied to the main and upper roof. furnish and install a 60mil tpo roof system over the prepared surface utilizing purlin fasteners and induction welding plates. the tpo membrane seams will be overlapped a minimum of 5", then hot air welded together
Areas of existing metal r-panel are deteriorating. areas of existing standing seam panels are deteriorating. furnish and install a layer of 1.5" eps insulation. this layer of insulation will be cut to fit the existing panel and loose laid directly into the r-panel flutes on the main roof. furnish and install tapered insulation crickets in the area of internal gutter encapsulation on the main roof. furnish and install a layer of 3" eps insulation. this layer of insulation will be pre-cut to fit the existing panel profile and loose laid directly into the trap panel flutes on the upper roof only. furnish and install a layer of 1/4" dexcell cover board. this layer of cover board will be mechanically attached to the existing panel utilizing fm global approved 3" plates and fasteners applied to the main and upper roof. furnish and install a 60mil tpo roof system over the prepared surface utilizing purlin fasteners and induction welding plates. the tpo membrane seams will be overlapped a minimum of 5", then hot air welded together
City of Dallas permitCommercial Roofing Permit
Sources: City of Dallas
Questions about 10429 Harry Hines Blvd
What is being built at 10429 Harry Hines Blvd?
The City of Dallas permit describes roof work on an existing commercial building, not a new building. It calls for insulation, cover board and a TPO roof system.
When was the roofing permit issued for 10429 Harry Hines Blvd?
The permit was issued on August 12, 2025. Its number is COM-ROOF-25-000090.
What kind of roof is being installed at 10429 Harry Hines Blvd?
The permit description specifies a 60-mil TPO roof system over prepared surfaces on the main and upper roofs.
Does the permit show a new business opening at 10429 Harry Hines Blvd?
No business opening is identified in the permit record. It describes roofing work on an existing commercial building.
How much will the roof work at 10429 Harry Hines Blvd cost?
The City of Dallas record does not list a reported valuation or project cost.
Also being built nearby
All of 75220- 10430 Harry Hines BlvdDec 24, 2025Remove existing roof, repair rotted decking as needed and install new roofing material to match existing roof · 54 m away
- 10521 Harry Hines BlvdJul 28, 2026Turn electric back on after tenant vacated · 88 m away
- 10508 Harry Hines BlvdJan 20, 2026Relocate gas meter · 92 m away
- 10529 Harry Hines BlvdDec 5, 2025Remove existing roof and install new roof.no structural changes allowed under this permit replaced beams and sheet metal and roofing metal · 95 m away
- 10520 Harry Hines BlvdSep 29, 2026Requesting commercial electrical permit to restore electrical service to existing tire shop. electrical service was previously disconnected and permit is required for utility service to be re-established. no change to existing land use or occupancy is proposed · 111 m away
- 10524 Harry Hines BlvdJan 12, 2021Erect attached sign · 118 m away
- 10333 Harry Hines BlvdSep 22, 2020Gas test · 158 m away
- 2682 Myrtle Springs AveJan 16, 2026Mcr 105-106 is going to be one suite · 202 m away
- 2674 Myrtle Springs AveOct 22, 2026This is a service entrance upgrade from 200 amps to 600 amps with 3 meter sockets and 2 new electrical panels · 236 m away
- 10569 Denton DrFeb 12, 2026Electrical panel change and electrical for 2 bathrooms · 253 m away
- 10571 Denton DrJun 10, 2026No electrical work performed customer needed a electrician to come and inspect the electrical and pull a permit to get power turned back on · 256 m away
- 10217 Harry Hines BlvdOct 28, 2026Proposed permanent installation of four (4) 40-foot shipping containers at the existing commercial property located at 10217 harry hines boulevard, dallas, texas.three (3) containers will be positioned together and utilized for permanent refrigerated cold storage in connection with existing business operations. the fourth (4th) container will be located separately on the property and utilized for mechanical equipment, tools, and general maintenance supply storage.the containers will be installed in the locations indicated on the proposed site plan. the project does not include any modifications or additions to the existing principal building. all proposed installations will be subject to applicable city of dallas building, electrical, fire safety, and site requirements · 268 m away