2674 Myrtle Springs Ave
Dallas, TX 75220
Interior remodel and electrical upgrades at 2674 Myrtle Springs Ave
A September 1, 2026, permit describes an interior remodel to create suites 100, 200 and 300 in an existing building at 2674 Myrtle Springs Ave. Two commercial electrical permits filed October 21 and 22 describe upgrading service from 200 amps to 600 amps, with three meter sockets and two new electrical panels.
Summarized from City of Dallas records · updated Oct 22, 2026
- Projects
- 3
- 3 filings
- Latest filing
- Oct 22, 2026
- since Sep 1, 2026
- Largest scope
- —
- Listed value
- —
Permit & project history
3 projectsThis is a service entrance upgrade from 200 amps to 600 amps with 3 meter sockets and 2 new electrical panels
This is a service entrance upgrade from 200 amps to 600 amps with 3 meter sockets and 2 new electrical panels
City of Dallas permitCommercial Electrical PermitThis is a service entrance upgrade from 200 amps to 600 amps with three meter socket and two new electrical panels
This is a service entrance upgrade from 200 amps to 600 amps with three meter socket and two new electrical panels
City of Dallas permitCommercial Electrical Permit
Sources: City of Dallas
Questions about 2674 Myrtle Springs Ave
What is being built at 2674 Myrtle Springs Ave?
City permits indicate an interior remodel to create suites 100, 200 and 300 in an existing building, along with an electrical service upgrade.
When was the remodel permit filed for 2674 Myrtle Springs Ave?
The commercial alteration and addition permit was filed September 1, 2026. It describes an interior remodel creating suites 100, 200 and 300.
What electrical work is permitted at 2674 Myrtle Springs Ave?
Permits describe upgrading the electrical service from 200 amps to 600 amps, adding three meter sockets and installing two new electrical panels.
What are the permit numbers for work at 2674 Myrtle Springs Ave?
The electrical permits are COM-ELC-26-005220, filed October 21, 2026, and COM-ELC-26-005252, filed October 22, 2026. The interior remodel permit is COM-ALT-ADD-26-001811, filed September 1, 2026.
Is a new building planned for 2674 Myrtle Springs Ave?
The records provided describe an interior remodel of an existing building and electrical service upgrades. They do not describe construction of a new building.
Also being built nearby
All of 75220- 2682 Myrtle Springs AveJan 16, 2026Mcr 105-106 is going to be one suite · 47 m away
- 10529 Harry Hines BlvdDec 5, 2025Remove existing roof and install new roof.no structural changes allowed under this permit replaced beams and sheet metal and roofing metal · 169 m away
- 2663 Myrtle Springs AveNov 4, 2026New construction-addition plumbing · 173 m away
- 10521 Harry Hines BlvdJul 28, 2026Turn electric back on after tenant vacated · 173 m away
- 10524 Harry Hines BlvdJan 12, 2021Erect attached sign · 187 m away
- 10520 Harry Hines BlvdSep 29, 2026Requesting commercial electrical permit to restore electrical service to existing tire shop. electrical service was previously disconnected and permit is required for utility service to be re-established. no change to existing land use or occupancy is proposed · 190 m away
- 10508 Harry Hines BlvdJan 20, 2026Relocate gas meter · 200 m away
- 10645 Harry Hines Blvd · Bodega Fine SpiritsMay 15, 2025New hvac with ductwork · 214 m away
- 10650 Harry Hines BlvdOct 22, 2020Card reader adds to turnstile and two free egress reader doors to an existing access control system · 219 m away
- 2655 Myrtle Springs AveJan 7, 202610 gallon electric water heater · 232 m away
- 10429 Harry Hines BlvdAug 12, 2025Areas of existing metal r-panel are deteriorating. areas of existing standing seam panels are deteriorating. furnish and install a layer of 1.5" eps insulation. this layer of insulation will be cut to fit the existing panel and loose laid directly into the r-panel flutes on the main roof. furnish and install tapered insulation crickets in the area of internal gutter encapsulation on the main roof. furnish and install a layer of 3" eps insulation. this layer of insulation will be pre-cut to fit the existing panel profile and loose laid directly into the trap panel flutes on the upper roof only. furnish and install a layer of 1/4" dexcell cover board. this layer of cover board will be mechanically attached to the existing panel utilizing fm global approved 3" plates and fasteners applied to the main and upper roof. furnish and install a 60mil tpo roof system over the prepared surface utilizing purlin fasteners and induction welding plates. the tpo membrane seams will be overlapped a minimum of 5", then hot air welded together · 236 m away
- 2677 Freewood DrJul 28, 2026Replace gas piping · 238 m away