Recent · latest filing Jan 2026Commercial
10508 Harry Hines Blvd
Dallas, TX 75220
Commercial permit to relocate gas meter at 10508 Harry Hines
A commercial plumbing permit indicates a gas meter is being relocated at 10508 Harry Hines Blvd. The City of Dallas filed permit COM-PLM-26-000201 on January 20, 2026.
Summarized from City of Dallas records · updated Jan 20, 2026
- Projects
- 1
- 1 filings
- Latest filing
- Jan 20, 2026
- since Jan 20, 2026
- Largest scope
- —
- Listed value
- —
Permit & project history
1 projectSources: City of Dallas
Questions about 10508 Harry Hines Blvd
What is being built at 10508 Harry Hines Blvd?
A City of Dallas commercial plumbing permit lists work to relocate a gas meter. The record does not describe a new building.
What work was permitted at 10508 Harry Hines Blvd?
Permit COM-PLM-26-000201 covers relocating a gas meter.
When was the gas meter relocation permit filed?
The City of Dallas filed permit COM-PLM-26-000201 on January 20, 2026.
Is the permit for commercial or residential work at 10508 Harry Hines?
It is listed as a commercial plumbing permit.
Is a new business opening at 10508 Harry Hines Blvd?
The permit record describes gas meter relocation and does not identify a business or tenant.
Also being built nearby
All of 75220- 10520 Harry Hines BlvdSep 29, 2026Requesting commercial electrical permit to restore electrical service to existing tire shop. electrical service was previously disconnected and permit is required for utility service to be re-established. no change to existing land use or occupancy is proposed · 20 m away
- 10524 Harry Hines BlvdJan 12, 2021Erect attached sign · 27 m away
- 10521 Harry Hines BlvdJul 28, 2026Turn electric back on after tenant vacated · 31 m away
- 10529 Harry Hines BlvdDec 5, 2025Remove existing roof and install new roof.no structural changes allowed under this permit replaced beams and sheet metal and roofing metal · 32 m away
- 10429 Harry Hines BlvdAug 12, 2025Areas of existing metal r-panel are deteriorating. areas of existing standing seam panels are deteriorating. furnish and install a layer of 1.5" eps insulation. this layer of insulation will be cut to fit the existing panel and loose laid directly into the r-panel flutes on the main roof. furnish and install tapered insulation crickets in the area of internal gutter encapsulation on the main roof. furnish and install a layer of 3" eps insulation. this layer of insulation will be pre-cut to fit the existing panel profile and loose laid directly into the trap panel flutes on the upper roof only. furnish and install a layer of 1/4" dexcell cover board. this layer of cover board will be mechanically attached to the existing panel utilizing fm global approved 3" plates and fasteners applied to the main and upper roof. furnish and install a 60mil tpo roof system over the prepared surface utilizing purlin fasteners and induction welding plates. the tpo membrane seams will be overlapped a minimum of 5", then hot air welded together · 92 m away
- 10430 Harry Hines BlvdDec 24, 2025Remove existing roof, repair rotted decking as needed and install new roofing material to match existing roof · 132 m away
- 2682 Myrtle Springs AveJan 16, 2026Mcr 105-106 is going to be one suite · 155 m away
- 10569 Denton DrFeb 12, 2026Electrical panel change and electrical for 2 bathrooms · 181 m away
- 10571 Denton DrJun 10, 2026No electrical work performed customer needed a electrician to come and inspect the electrical and pull a permit to get power turned back on · 183 m away
- 2674 Myrtle Springs AveOct 22, 2026This is a service entrance upgrade from 200 amps to 600 amps with 3 meter sockets and 2 new electrical panels · 200 m away
- 10650 Harry Hines BlvdOct 22, 2020Card reader adds to turnstile and two free egress reader doors to an existing access control system · 237 m away
- 10333 Harry Hines BlvdSep 22, 2020Gas test · 246 m away