groundranger
Recent · latest filing May 2026Commercial

2777 N Buckner Blvd

Dallas, TX 75228

Dallas permit covers rebuild of an 8-unit apartment building

A City of Dallas permit filed April 15, 2026, covers new construction of a two-story multifamily building at 2777 N Buckner Blvd. The permit describes an eight-unit rebuild after a fire-damaged building was demolished: two one-bedroom units and six two-bedroom units.

Summarized from City of Dallas records · updated May 1, 2026

Projects
10
10 filings
Latest filing
May 1, 2026
since Aug 5, 2025
Largest scope
—
Listed value
—

Permit & project history

10 projects
  1. Electrical meter release. building 1500 house panel

    Electrical meter release. building 1500 house panel

    City of Dallas permitCommercial Electrical Permit
    Record
    COM-ELC-26-001970
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  2. Qyeam meeting 5.7.2026 (all day) new construction - rebuild of 2-story multifamily (damaged by fire & demolished) - 8 units: 2 one-bedroom & 6 two-bedroom units

    Qyeam meeting 5.7.2026 (all day) new construction - rebuild of 2-story multifamily (damaged by fire & demolished) - 8 units: 2 one-bedroom & 6 two-bedroom units

    City of Dallas permitCommercial New Construction Permit
    Record
    COM-NEW-26-000116
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  3. Install led letters on existing wall. install non iluminated sign on existing monument sign

    Install led letters on existing wall. install non iluminated sign on existing monument sign

    City of Dallas permitCommercial Electrical Permit
    Record
    COM-ELC-26-001345
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  4. Clean and show

    Clean and show

    City of Dallas permitCommercial Electrical Permit
    Record
    COM-ELC-25-003844
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  5. Demolition and dispose of current chain link fence furnish and install approx 1,403 of 8’ tall galvanized and powder coat iron fence with press point pickets. material: square post 3"x3"x11' 14 ga. / panel -press point picket 94” x 94” (2) rails 1.5” sq 14 gauge / pickets ¾”x ¾” 16 gauge 3 15/16” air space between pickets with press pointall new steel fence will be galvanized and powder coated gloss black. panels will be welded to post on site and touched up with spray paintby gate # 5 furnish and install approx 24’ of 6’ tall galvanized and powder coat iron fence with press point pickets. material: square post plated 2"x2"x6' 14 ga. / panel -press point picket 94” x 94” (2) rails 1 ¼” sq 14 gauge with ¾” x ¾” pickets 3 ¾” air space between pickets 16 gauge all new steel fence will be galvanized and powder coated gloss black. panels will be welded to post on site and touched up with spray paintcurrent drive gates missing. post are in place we will reuse post and install new gates in old locations. furnish fabricate, prime paint and install drive gate 22x6 reuse guide and catch posts material:/ 2” x 4” bottom rail / ¾” press point pickets 4 “on center / punch channel top rail /2” end rails / 2 (4”) power wheels with box / 2 rubber guide roller / galvanized vtrac with concrete anchors/ reuse guidepost slide gate operator csl 24vdc with bbuincludes: , high traffic commercial use, warranty 5 years commercial on parts. / 1 safety loops / 1 safety/exit loop / 1 photo eye / 1 dallas fire receiver / 1 tomar strobe, 1 knox key switch, 1 drop chain kit and knox pad lockno electrical work included. electrical already in location. if any electrical work is needed an electrician will be required access control cell gate watchman w482 (only at gate #4)furnish and install w482 keypad with pedestal please see cut sheet for details. internet will be required at these locations gate #1 new gate 22x6 with wheels, new vtrack, new guide rollers, new motor, 2 new loops, knox lock and chain drop with dallas fire receiver, tomar strobe and key switch, exit only accessgate #2 new gate 22x6 with wheels, new vtrack, new guide rollers, new motor, 2 new loops, knox lock and chain drop with dallas fire receiver, tomar strobe and key switch. exit only access, gate #3 new gate 22x6 with wheels, new vtrack, new guide rollers, new motor, 2 new loops, knox lock and chain drop with dallas fire receiver, tomar strobe and key switch. exit only access,gate #4 new gate 22x6 with wheels, new vtrack, new guide rollers, new motor, 2 new loops, knox lock and chain drop with dallas fire receiver, tomar strobe and key switch. cell gate watchman w482gate #5 new gate 22x6 with wheels, new vtrack, new guide rollers, new motor, 2 new loops, knox lock and chain drop with dallas fire receiver, tomar strobe and key switch. exit only accessno boring or electrical work included reuse all old currently in place dallas fire department permit included no electrical permit included

    Demolition and dispose of current chain link fence furnish and install approx 1,403 of 8’ tall galvanized and powder coat iron fence with press point pickets. material: square post 3"x3"x11' 14 ga. / panel -press point picket 94” x 94” (2) rails 1.5” sq 14 gauge / pickets ¾”x ¾” 16 gauge 3 15/16” air space between pickets with press pointall new steel fence will be galvanized and powder coated gloss black. panels will be welded to post on site and touched up with spray paintby gate # 5 furnish and install approx 24’ of 6’ tall galvanized and powder coat iron fence with press point pickets. material: square post plated 2"x2"x6' 14 ga. / panel -press point picket 94” x 94” (2) rails 1 ¼” sq 14 gauge with ¾” x ¾” pickets 3 ¾” air space between pickets 16 gauge all new steel fence will be galvanized and powder coated gloss black. panels will be welded to post on site and touched up with spray paintcurrent drive gates missing. post are in place we will reuse post and install new gates in old locations. furnish fabricate, prime paint and install drive gate 22x6 reuse guide and catch posts material:/ 2” x 4” bottom rail / ¾” press point pickets 4 “on center / punch channel top rail /2” end rails / 2 (4”) power wheels with box / 2 rubber guide roller / galvanized vtrac with concrete anchors/ reuse guidepost slide gate operator csl 24vdc with bbuincludes: , high traffic commercial use, warranty 5 years commercial on parts. / 1 safety loops / 1 safety/exit loop / 1 photo eye / 1 dallas fire receiver / 1 tomar strobe, 1 knox key switch, 1 drop chain kit and knox pad lockno electrical work included. electrical already in location. if any electrical work is needed an electrician will be required access control cell gate watchman w482 (only at gate #4)furnish and install w482 keypad with pedestal please see cut sheet for details. internet will be required at these locations gate #1 new gate 22x6 with wheels, new vtrack, new guide rollers, new motor, 2 new loops, knox lock and chain drop with dallas fire receiver, tomar strobe and key switch, exit only accessgate #2 new gate 22x6 with wheels, new vtrack, new guide rollers, new motor, 2 new loops, knox lock and chain drop with dallas fire receiver, tomar strobe and key switch. exit only access, gate #3 new gate 22x6 with wheels, new vtrack, new guide rollers, new motor, 2 new loops, knox lock and chain drop with dallas fire receiver, tomar strobe and key switch. exit only access,gate #4 new gate 22x6 with wheels, new vtrack, new guide rollers, new motor, 2 new loops, knox lock and chain drop with dallas fire receiver, tomar strobe and key switch. cell gate watchman w482gate #5 new gate 22x6 with wheels, new vtrack, new guide rollers, new motor, 2 new loops, knox lock and chain drop with dallas fire receiver, tomar strobe and key switch. exit only accessno boring or electrical work included reuse all old currently in place dallas fire department permit included no electrical permit included

    City of Dallas permitCommercial Accessory Structure Permit
    Record
    COM-ACC-26-000003
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  6. No work/ release oncor is requesting city inspection since meters have been off for a while unit 2 , house light #8, and house lights #19

    No work/ release oncor is requesting city inspection since meters have been off for a while unit 2 , house light #8, and house lights #19

    City of Dallas permitCommercial Electrical Permit
    Record
    COM-ELC-26-000119
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  7. Demolition of a 2 story building that caught fire. accoridng to addressing the address we recognize is 2777 n buckner not 2795 please see email exchange in the documents

    Demolition of a 2 story building that caught fire. accoridng to addressing the address we recognize is 2777 n buckner not 2795 please see email exchange in the documents

    City of Dallas permitCommercial Demolition Permit
    Record
    COM-DEM-25-000100
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  8. Tunnel under structure to replace up to 4ft of sewer line

    Tunnel under structure to replace up to 4ft of sewer line

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-25-001054
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  9. Gas test

    Gas test

    City of Dallas permitPlumbing (PL) Multi Family Alteration$12
    Record
    1912243021
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  10. Electrical repairs

    Electrical repairs

    City of Dallas permitElectrical (EL) Multi Family Alteration$25
    Record
    1908233052
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro

Sources: City of Dallas

Questions about 2777 N Buckner Blvd

What is being built at 2777 N Buckner Blvd in Dallas?

A City of Dallas permit describes a new two-story, eight-unit multifamily building. Permit COM-NEW-26-000116 was filed April 15, 2026.

How many apartments are planned at 2777 N Buckner Blvd?

The permit describes eight units: two one-bedroom apartments and six two-bedroom apartments.

What happened to the previous building at 2777 N Buckner Blvd?

A City of Dallas demolition permit filed November 24, 2025, describes demolition of a two-story building that had caught fire. A later permit covers rebuilding the site with an eight-unit multifamily building.

When was the apartment rebuild at 2777 N Buckner permitted?

The new-construction permit, COM-NEW-26-000116, was filed April 15, 2026.

Will the new building at 2777 N Buckner have one- or two-bedroom apartments?

The permit describes two one-bedroom units and six two-bedroom units in the planned eight-unit building.

Also being built nearby

All of 75228

More apartments & multifamily in 75228, demolitions in 75228, cell towers & telecom in 75228.

Get alerts for 2777 N Buckner Blvd