groundranger
Active · latest filing Oct 2026Commercial

10865 Miller Rd

Dallas, TX 75238

Warehouse shell and Building 2 office work at 10865 Miller Rd

Dallas permit records indicate a ground-up shell building with sewer, water and gas work at 10865 Miller Rd. Later filings cover warehouse equipment, a first-time finish-out of a shell warehouse and an interior spec office in Building 2. The first listed permit was filed March 31, 2026, and the latest was filed October 27, 2026.

Summarized from City of Dallas records · updated Oct 27, 2026

Projects
7
7 filings
Latest filing
Oct 27, 2026
since Mar 31, 2026
Largest scope
—
Listed value
—

Permit & project history

7 projects
  1. Qteam inhouse electrical upgrade for suite 200

    Qteam inhouse electrical upgrade for suite 200

    City of Dallas permitCommercial New Construction Permit
    Record
    COM-NEW-26-000354
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  2. Building 2 spec office - adding interior spec office, sewer water and gas

    Building 2 spec office - adding interior spec office, sewer water and gas

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-003964
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  3. Electrical installation for building permit 2210241061

    Electrical installation for building permit 2210241061

    City of Dallas permitCommercial Electrical Permit
    Record
    COM-ELC-26-004890
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  4. Qteam inhouse first time finish out of shell warehouse

    Qteam inhouse first time finish out of shell warehouse

    City of Dallas permitCommercial Alteration Addition Permit
    Record
    COM-ALT-ADD-26-001531
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  5. Provision & installation of the following:• warehouse (building. 2):• (6) gas fired unit heater(s) with spark ignition, power vent and standard thermostat, 300 mbh input each, 120/1/60• (5) roof mounted propeller exhaust fan(s), complete with high temperature rating, 35,000 cfm, standard insulated flat factory curb, magnetic damper latches, and nema-3 service disconnect, 7.5 hp 460/3/60• (1) unrated roof mounted propeller exhaust fan(s), complete with 15,000 cfm, standard insulated flat factory curb, butterfly backdraft damper, magnetic damper latches and nema-3 service disconnect, 3 hp 460/3/60• (5) wall mounted adjustable louver(s) (96” x 120” x 6”) of extruded aluminum construction complete with mill finish, motor operator(s) and birdscreen, 120/1/60• pump room:• (1) 5kw electric unit heater with mounting bracket and integral thermostat, 460/3/60• (1) roof mounted exhaust fan with fractional hp motor, nema-1 service disconnect, roof curb, and gravity backdraft damper• (1) rectangular duct drop with fire damper (if required at the lid of the pump room)• (1) wall mounted adjustable louver (24” x 24” x 6”) of extruded aluminum construction complete with mill finish, motor operator and birdscreen, 120/1/60• note: this pump room design is based on an electric fire pump.• provision (only), of the following:• (1) line voltage thermostat for pump room ventilation system – installed by electrician

    Provision & installation of the following:• warehouse (building. 2):• (6) gas fired unit heater(s) with spark ignition, power vent and standard thermostat, 300 mbh input each, 120/1/60• (5) roof mounted propeller exhaust fan(s), complete with high temperature rating, 35,000 cfm, standard insulated flat factory curb, magnetic damper latches, and nema-3 service disconnect, 7.5 hp 460/3/60• (1) unrated roof mounted propeller exhaust fan(s), complete with 15,000 cfm, standard insulated flat factory curb, butterfly backdraft damper, magnetic damper latches and nema-3 service disconnect, 3 hp 460/3/60• (5) wall mounted adjustable louver(s) (96” x 120” x 6”) of extruded aluminum construction complete with mill finish, motor operator(s) and birdscreen, 120/1/60• pump room:• (1) 5kw electric unit heater with mounting bracket and integral thermostat, 460/3/60• (1) roof mounted exhaust fan with fractional hp motor, nema-1 service disconnect, roof curb, and gravity backdraft damper• (1) rectangular duct drop with fire damper (if required at the lid of the pump room)• (1) wall mounted adjustable louver (24” x 24” x 6”) of extruded aluminum construction complete with mill finish, motor operator and birdscreen, 120/1/60• note: this pump room design is based on an electric fire pump.• provision (only), of the following:• (1) line voltage thermostat for pump room ventilation system – installed by electrician

    City of Dallas permitCommercial Mechanical Permit
    Record
    COM-MEC-26-001510
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  6. 222 lf of 6" pvc sewer laterals from public ssmh to building. laterals "q" and "p" from the public easement line towards the building

    222 lf of 6" pvc sewer laterals from public ssmh to building. laterals "q" and "p" from the public easement line towards the building

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-002258
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  7. Ground up shell bld. sewer, water, gas

    Ground up shell bld. sewer, water, gas

    City of Dallas permitCommercial Plumbing Permit
    Record
    COM-PLM-26-001227
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro

Sources: City of Dallas

Questions about 10865 Miller Rd

What is being built at 10865 Miller Rd in Dallas?

Dallas permit records describe ground-up shell building utility work, warehouse work and an interior spec office in Building 2. The filings do not identify a tenant.

Is a new warehouse being built at 10865 Miller Rd?

A March 31, 2026, plumbing permit describes ground-up shell building sewer, water and gas work. A July 30 permit describes a first-time finish-out of a shell warehouse.

What is being added to Building 2 at 10865 Miller Rd?

A permit filed October 12, 2026, describes an interior spec office and sewer, water and gas work. A June 23 mechanical permit lists heaters, exhaust fans and ventilation equipment for the warehouse and pump room.

When were permits filed for work at 10865 Miller Rd?

The listed filings run from March 31, 2026, through October 27, 2026. The latest record, COM-NEW-26-000354, is for an electrical upgrade for suite 200.

Is a business or tenant named for 10865 Miller Rd?

The provided permit records do not identify an occupant or tenant. They describe warehouse, office, utility and electrical work.

What does the warehouse work at 10865 Miller Rd include?

A June 23, 2026, mechanical permit lists gas-fired unit heaters, exhaust fans and wall louvers for the warehouse, along with equipment for a pump room. A July 30 permit describes a first-time finish-out of a shell warehouse.

Also being built nearby

All of 75238

More warehouses & industrial in 75238, offices in 75238.

Get alerts for 10865 Miller Rd