6240 Revere Pl
Dallas, TX 75214
Gas service and piping work permitted at 6240 Revere Pl
A residential plumbing permit filed November 9, 2026, covers installing a new yard gas service and running pipe in the attic for a water heater and furnace. The City of Dallas record lists permit RES-PLM-26-012070.
Summarized from City of Dallas records · updated Nov 9, 2026
- Projects
- 1
- 1 filings
- Latest filing
- Nov 9, 2026
- since Nov 9, 2026
- Largest scope
- —
- Listed value
- —
Permit & project history
1 projectSources: City of Dallas
Questions about 6240 Revere Pl
What work is being done at 6240 Revere Pl in Dallas?
A City of Dallas residential plumbing permit covers a new yard gas service and pipe in the attic for a water heater and furnace.
Was a permit filed for gas work at 6240 Revere Pl?
Yes. Permit RES-PLM-26-012070 was filed November 9, 2026, for the gas service and piping work.
When was the plumbing permit for 6240 Revere Pl filed?
The City of Dallas permit was filed November 9, 2026.
Is a new home being built at 6240 Revere Pl?
The available record is for a residential plumbing permit, not a new-home construction permit. It describes gas service and piping work for a water heater and furnace.
Does the permit say a new water heater or furnace is being installed at 6240 Revere Pl?
No. It says pipe will be run in the attic for a water heater and furnace; it does not describe installing new appliances.
Also being built nearby
All of 75214- 6226 Revere PlNov 13, 2026Install 8' fence · 52 m away
- 6257 Revere PlNov 16, 2020Demolition sfd · 55 m away
- 6263 Revere PlMar 25, 20268' wood fence3 gates · 65 m away
- 6223 Revere PlAug 27, 2026Replace the existing 100 amp federal pacific stab-lok load center with a new 200amp service.install a new 2 inch rigid galvanized steel service mast, weatherhead, and roofflashing. install a new 200 amp ringless meter socket on the exterior wall at theheight required by oncor. install new 2/0 awg copper service entrance conductors.install a new 200 amp, 42 space, nema 3r main breaker load center on the exteriorwall. the existing load center is in an interior pantry that cannot provide therequired working clearance in front of a panel, so the new load center is installedoutdoors. the outdoor main breaker serves as the emergency disconnect.remove the existing federal pacific load center. install junction enclosures at theformer panel location and re-route 26 existing branch circuits through the attic tothe new load center.install a whole house surge protective device.install a new grounding electrode system consisting of two 5/8 inch by 8 foot groundrods, a cold water pipe bond, an intersystem bonding termination, and a #4 awg barecopper grounding electrode conductor. install insulated grounding bushings andsupply side bonding jumpers on the service raceway · 68 m away
- 6267 Revere PlJun 23, 2026Replacing 4 ton hvac unit · 72 m away
- 6237 Malcolm DrOct 29, 2026Nsfaa residential addition · 79 m away
- 6294 Martel AveOct 30, 2026100' 8" cedar fence backyard · 90 m away
- 6236 Malcolm DrFeb 24, 2026Demolition of house · 92 m away
- 6227 Malcolm DrAug 18, 2025Installed new hvac · 95 m away
- 6281 Martel AveJul 9, 2026Replacing copper water lines in the home with pex · 99 m away
- 6285 Martel AveMay 4, 202630 years hd timberline architecture shingles including synthetic felt, z ridge, metal edge, metal valley, roof vents, jack boots, step flashing · 99 m away
- 6284 Revere PlDec 16, 2020Demolition sfd · 101 m away