1934 Elmwood Blvd
Dallas, TX 75224
Second-story addition and garage conversion at 1934 Elmwood Blvd
A residential permit filed August 17, 2025, describes adding a second story and converting the garage into a separate guest dwelling at 1934 Elmwood Blvd. The work also includes first-floor bathroom changes and extending the foundation to accommodate stairs. Later permits cover plumbing, a 4-ton electric system and ductwork, and electrical work for the addition.
Summarized from City of Dallas records · updated Dec 11, 2025
- Projects
- 4
- 4 filings
- Latest filing
- Dec 11, 2025
- since Aug 17, 2025
- Largest scope
- —
- Listed value
- —
Permit & project history
4 projectsNsfaa-we will be adding a second story to this building, including running new hvac, plumbing, and electrical to the dwelling. on the first floor there will demolition walls to add a half bath and make existing bath a jack and jill. we will extend the foundation back 5 ft in order to add stairs to that access second floor. the garage has existing plumbing, hvac and electrical we will be removing garage doors to make it a separate dwelling for guests
Nsfaa-we will be adding a second story to this building, including running new hvac, plumbing, and electrical to the dwelling. on the first floor there will demolition walls to add a half bath and make existing bath a jack and jill. we will extend the foundation back 5 ft in order to add stairs to that access second floor. the garage has existing plumbing, hvac and electrical we will be removing garage doors to make it a separate dwelling for guests
City of Dallas permitResidential Alteration Addition Permit
Sources: City of Dallas
Questions about 1934 Elmwood Blvd
What is being built at 1934 Elmwood Blvd in Dallas?
A City of Dallas residential permit describes a second-story addition and a garage conversion into a separate dwelling for guests. The permit was filed August 17, 2025.
Is 1934 Elmwood Blvd getting a second story?
Yes. Permit RES-ALT-ADD-25-000480 describes adding a second story to the home, with new HVAC, plumbing, and electrical work.
Is the garage at 1934 Elmwood Blvd being converted?
The August 17, 2025 permit says the garage doors will be removed and the garage made into a separate dwelling for guests. The permit also mentions existing garage utilities.
When was the addition at 1934 Elmwood Blvd permitted?
The residential alteration and addition permit was filed August 17, 2025. Related plumbing, mechanical, and electrical permits were filed from October through December 2025.
What other work is included at 1934 Elmwood Blvd?
The permit describes removing first-floor walls to add a half bath and change the existing bathroom to a Jack-and-Jill layout. It also calls for extending the foundation five feet to accommodate stairs to the second floor.
What HVAC work is permitted at 1934 Elmwood Blvd?
A City of Dallas mechanical permit filed October 23, 2025, describes a 4-ton electric system and ductwork. The permit is RES-MEC-25-003285.
Also being built nearby
All of 75224- 1930 Elmwood BlvdSep 22, 2020Remove existing roof and install new roof · 6 m away
- 1922 Elmwood BlvdOct 23, 2025Replace hvac system · 17 m away
- 1945 Elmwood BlvdSep 18, 2025Gas test. removed wall space heaters · 20 m away
- 1918 Elmwood BlvdMar 30, 2026Gas test for stove and furnace · 23 m away
- 1910 Elmwood BlvdNov 3, 2025Pressure test on gas system · 35 m away
- 1902 Elmwood BlvdOct 13, 2020Replace gas line · 47 m away
- 2002 Elmwood BlvdNov 16, 2020Gas test · 99 m away
- 2010 Elmwood BlvdAug 13, 2025Gas test only · 111 m away
- 1922 Ferndale AveNov 25, 2025Re decking repair on 2x6 new shingles 30 years and we cut tree around on top to the roof · 115 m away
- 1902 Ferndale AveApr 4, 2026Service and panel upgrade · 117 m away
- 2030 Elmwood BlvdMar 30, 2026No work performed neighbour's house caught fire and caught their garage on fire oncor took their meter and wanted them to have a permit pulled and a inspection done. our tech said there is no fire damage to the electrical · 139 m away
- 2034 Elmwood BlvdApr 20, 2026This recommended option includes a complete upgrade of the home’s electrical service to restore power in a safe, reliable, and fully code-compliant manner following fire damage to the existing overhead service.work to be performed includes removal of the damaged and non-compliant existing service equipment, including the current seu service conductors and zinsco panel.installation of a new 200-amp electrical service will be performed in accordance with current code and utility requirements. this includes installation of a rigid, through-the-roof service mast as required by oncor’s most recent service standards to allow for reconnection of power.a new 200-amp outdoor-rated main breaker panel will be installed to replace the existing zinsco panel, bringing the system up to current safety standards and meeting city of dallas requirements.this option includes installation of a 36ka whole-home surge protector, providing protection for the home’s electrical system and appliances against common voltage spikes and surges.a full grounding system will be installed to meet current nec requirements. this includes proper grounding electrode installation and bonding of the electrical system to ensure safety and compliance.additionally, we will install three wireless interconnected smoke detectors to improve life safety within the home. these units will communicate with each other to provide full-home notification in the event of smoke or fire detection.all work will be performed under a city of dallas electrical permit. the installation will be inspected and must pass inspection before the utility provider (oncor) will reconnect power to the home.applicable nec code references:nec 230.50 – protection against physical damagenec 230.54 – overhead service locations (service mast requirements)nec 230.70 – service disconnect requirementsnec 250.50 – grounding electrode systemnec 250.53 – grounding electrode installationnec 285 – surge protective devicesnec 408.36 – overcurrent protectionnec 110.12 – mechanical execution of worknec 210.12 / 210.52 – general circuit & safety requirements (as applicable)additional notes:existing seu service and zinsco panel will be removed and replaced as required for compliance.rigid mast service is required by oncor for reconnection.all work must pass city of dallas inspection prior to utility reconnection.coordination with oncor will be required for final re-energization.power will remain off until all work is completed, inspected, and approved.change order and scope addendum:any changes to the outlined scope of work, including unforeseen conditions, limited or restricted access, or scheduling constraints, may require a change order. any additional work will be discussed and approved by the customer prior to proceeding · 145 m away
More demolitions in 75224.