2230 Lyndon B Johnson Fwy
Dallas, TX 75234 · Prologis, Inc.
Warehouse interior alteration for Architectural Surfaces
A 550-square-foot alteration of existing warehouse space for Architectural Surfaces - Will Call and RRs is registered at 2230 Lyndon B Johnson Fwy. The TDLR project registration was filed July 30, 2025, and lists an estimated project cost of $70,000.
Summarized from Texas Department of Licensing and Regulation records · updated Jul 30, 2025
- Projects
- 1
- 1 filings
- Latest filing
- Jul 30, 2025
- since Jul 30, 2025
- Largest scope
- 550 sf
- Estimated cost
- $70K
- state registration
Where this project stands
Finishing up · inspection nextArchitectural Surfaces - Will Call and RRs
550 sq ft · $70K est.
- RegisteredJul 30, 2025
- Plan review
- ConstructionAug '25 – Sep '25
- Inspectednow
- Closed
Scheduled to finish Sep 5, 2025; the state inspection hasn't been filed yet.
4 contacts on this project · 3 phone numbers
Permit & project history
1 projectAlteration of existing interior warehouse space — 2230 lyndon b johnson fwy
TDLR project registrationRenovation/AlterationReview Complete550 sq ft$70K est.- Project #
- TABS2025024782
- Tenant / owner
- Architectural Surfaces - Will Call And Rrs
- Design firm
- Pro
- Contact
- Pro
Sources: Texas Department of Licensing and Regulation
Questions about 2230 Lyndon B Johnson Fwy
What is being built at 2230 Lyndon B Johnson Fwy?
A TDLR registration describes a 550-square-foot alteration of existing interior warehouse space for Architectural Surfaces - Will Call and RRs. It does not describe a new building.
When was the warehouse alteration permitted?
The project was registered with TDLR on July 30, 2025. Its registration, TABS2025024782, is marked Review Complete.
How much will the project cost?
The TDLR registration lists an estimated project cost of $70,000. This is the applicant's estimate for the project.
How large is the project at 2230 Lyndon B Johnson Fwy?
The registered alteration covers 550 square feet of existing warehouse space.
What's being renovated near 635 Exchange Building A?
At 2230 Lyndon B Johnson Fwy, a TDLR registration describes an interior warehouse alteration for Architectural Surfaces - Will Call and RRs. The nearby 635 Exchange Building A is at 11641 Newberry St.
Is a new warehouse being built at 2230 Lyndon B Johnson Fwy?
The TDLR filing describes an alteration to existing interior warehouse space, not new warehouse construction. The filing was registered July 30, 2025.
Also being built nearby
All of 75234- 2230 L B J FwyOct 5, 2026Bu zo adding addition office space within existing building. framing, electrical, drywall and fire suppression
- 11645 Newberry St · Pr III/Cre 635 Exchange Holdings, LPOct 17, 2024635 exchange [newberry (tree farm)] — new construction — three new warehouses / office buildings totalling approximately 595,688 sq ft on 36.29 ac site, at the intersection of i635 (lyndon b johnson fwy) & newberry st · 233 m away
- 11625 Columbia Center DrDec 7, 2020Install high-pile storage rack system · 240 m away
- 11641 Newberry StJun 29, 2026Plumbing in warehouse building · 246 m away
- 11641 Newberry St · 635 Exchange Building AOct 13, 2025635 exchange spec suite - building a — renovation/alteration — this project consists of a 3.093 sq ft spec office located in a warehouse building. the project consists of office space, conference room, workspace, janitor closet, it closet, and (4) restrooms · 246 m away
- 11927 Mustang RdOct 28, 2025Gas test to restore gas · 419 m away
- 11925 N Stemmons FwyOct 16, 2026Need meter released to have power turned on · 433 m away
- 2350 Alberta DrOct 29, 2026Replace one existing 25-ton carrier packaged rooftop hvac unit at floor & decor store #104, located at 2350 alberta drive, dallas, tx 75229, with one owner-furnished carrier 25-ton packaged gas/electric rooftop unit, model 48feem28k5m6-3m4c0. new equipment is rated 460 volts, three-phase, 60 hz, with r-454b refrigerant and gas heating input of 310,000 btu/hr.work includes disconnecting existing electrical, gas, controls, condensate, and duct connections; recovering refrigerant from the removed equipment; and providing crane and rigging services to remove the existing unit and set the replacement in the same rooftop location. reconnect existing supply and return ductwork, electrical power, gas piping, condensate drainage, and controls, with connection adjustments and sealing as necessary for the replacement equipment.complete manufacturer-required startup and verify cooling, gas heating, airflow, condensate drainage, economizer operation, smoke-detector shutdown, and factory refrigerant leak detection and mitigation controls. test disturbed gas connections for leaks and secure and weather-seal equipment connections.this is a like-for-like replacement with no increase in cooling capacity or change in heating type, voltage, or phase. existing electrical conductors and overcurrent protection have been verified for reuse; no service upgrades are proposed. work includes mechanical permitting and final inspection · 521 m away
- 11506 Newberry StMar 13, 2026Encore is requesting an inspection due to a manual meter · 542 m away