groundranger
Historic · latest filing Jan 2021Commercial

16637 Coit Rd

Dallas, TX 75248

16637 Coit Rd: 2 projects on record

City of Dallas lists 2 filings across 2 projects at 16637 Coit Rd, Dallas, TX 75248. The most recent, filed January 21, 2021, covers: “Service release no work”.

Compiled from City of Dallas records · updated Jan 21, 2021

Projects
2
2 filings
Latest filing
Jan 21, 2021
since Jan 21, 2021
Largest scope
—
Listed value
—

Permit & project history

2 projects
  1. Service release no work

    Service release no work

    City of Dallas permitElectrical (EW) Commercial Alteration
    Record
    2101216001
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  2. Service release no work

    Service release no work

    City of Dallas permitElectrical (EW) Commercial Alteration
    Record
    2006156007
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro

Sources: City of Dallas

Questions about 16637 Coit Rd

What is being built at 16637 Coit Rd?

The latest filing (City of Dallas permit 2101216001, January 21, 2021) covers service release no work.

How many permits and filings does 16637 Coit Rd have?

2 filings across 2 projects, from January 21, 2021 to January 21, 2021.

Is there other construction near 16637 Coit Rd?

Yes. Nearby filings include 16731 Coit Rd (cut and remove existing pvc roof membrane. core cuts will be performed to identify potential areas of wet insulation. remove existing wall flashings to a workable surface and dispose of debris. remove existing perimeter metal edge and dispose of debris. install a layer of 1/2" hd iso roof board. this layer of roof board will be mechanically attached to the prepared substrate utilizing fm global (fm) approved fasteners and induction welding plates. install new roof membrane.install the new tpo membrane over the prepared surface. secure the membrane in place by welding it to the platesutilizing induction methodology. the thermoplastic membrane seams will be overlapped a minimum of 5", then hot air welded together. weld width shall be a minimum of 1.5" in width for automatic machine welding. weld width shall be 2" in width for hand welding. upon completion of welding, each seam shall be probed to ensure proper securement. install new wall flashings. install new perimeter metal edge, Sep 23, 2025); 7825 Mccallum Blvd (perimeter fence with entry and exit gate installationscope of work:demolition and remove approx 480' of existing 5' vinyl fencedemo and remove post and concreteset new 2" x 2" x 8' wrought iron post 24" below grade in sak-creteinstall new 6' wrought iron panels to new postpanels consist of 1-1/2" x 1-1/2" top and bottom rail and 3/4" x 3/4" picketsinstall new 4" x 4" x 10' wrought iron post 48" below grade in sak-cretecustom build new gates for specific openings to match perimeter fenceeast entry and exit gates to be double swing gates (4 gates total)west entry and exit gates to be single swing gates (2 gates total)(2) new pedestrian walkthrough gates to be installedgrind all welds smoothprime and paint all new fence to match existing on propertypour (6) new concrete pads for gate operatorsinstall (6) new eagle 200 swing gate operatorsinstall (8) new safety loopsinstall (4) new exit loopsinstall (4) new safety eyesinstall (4) new fireboxesinstall (2) new ak11 keypads on pedestrian gatesinstall (2) new mag locks on pedestrian gatesinstall (2) new exit buttons on pedestrian gateseast entrance electricalremove the existing house panel on building 18, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (4) dedicated 20 amp circuits from the house panel, up into the attic, over to the opposite end-of the building, and down to the base of the buildingbore under driveway in (2) locations to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (4) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorwest entrance electricalremove the existing house panel on building 1, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (2) dedicated 20 amp circuits from the house panel down to the base of the buildingbore under driveway in (1) location to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (2) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorclean and haul away all trash and debrisperimeter fence demolition and installation (east side of property)scope of work:demolition and remove approx 180' of existing 8' wood fenceinstall approx 210' of new 8' wrought iron fence with horizonal picketsset new 4" x 4" x 11' wrought iron post 36" below grade in sak-creteinstall new panels consisting of 2" x 2" top and bottom rails-with 3/4" x 3/4" pickets (same design as reflections new fence)grind all welds smoothprime and paint all new fence to match existing on propertyinstall new 6' horizonal pickets to metal panels (same design as reflections new fence)clean and haul away all trash and debris, Dec 22, 2025); 17613 Coit Rd (17613 coit building d install 20 concrete pilings to stabilize foundation, Apr 23, 2026).

How do I get alerts for new permits at 16637 Coit Rd?

Watch this address on groundranger and you'll get an email when a new permit or project filing appears here or nearby.

Also being built nearby

All of 75248
Get alerts for 16637 Coit Rd