7780 Mccallum Blvd
Dallas, TX 75248
Electrical release permit for Unit #2212 at 7780 McCallum Blvd
A commercial electrical permit for Unit #2212 at 7780 McCallum Blvd was filed on May 14, 2026. The permit description says “electrical release no work,” so it does not indicate construction or electrical work at the address.
Summarized from City of Dallas records · updated May 14, 2026
- Projects
- 1
- 1 filings
- Latest filing
- May 14, 2026
- since May 14, 2026
- Largest scope
- —
- Listed value
- —
Permit & project history
1 projectSources: City of Dallas
Questions about 7780 Mccallum Blvd
What is happening at 7780 McCallum Blvd in Dallas?
A City of Dallas commercial electrical permit was filed for Unit #2212 on May 14, 2026. Its description says “electrical release no work.”
Is anything being built at 7780 McCallum Blvd?
The permit record does not indicate new construction. It is for an electrical release with no work listed.
What does the permit for 7780 McCallum Blvd cover?
The City of Dallas permit, COM-ELC-26-002161, is a commercial electrical permit for Unit #2212. The description is “electrical release no work.”
When was the permit filed for 7780 McCallum Blvd?
The permit was filed on May 14, 2026.
Is a new business opening at 7780 McCallum Blvd?
The available permit record does not identify a business or indicate that one is opening. It describes an electrical release with no work.
Also being built nearby
All of 75248- 7825 Mccallum BlvdDec 22, 2025Perimeter fence with entry and exit gate installationscope of work:demolition and remove approx 480' of existing 5' vinyl fencedemo and remove post and concreteset new 2" x 2" x 8' wrought iron post 24" below grade in sak-creteinstall new 6' wrought iron panels to new postpanels consist of 1-1/2" x 1-1/2" top and bottom rail and 3/4" x 3/4" picketsinstall new 4" x 4" x 10' wrought iron post 48" below grade in sak-cretecustom build new gates for specific openings to match perimeter fenceeast entry and exit gates to be double swing gates (4 gates total)west entry and exit gates to be single swing gates (2 gates total)(2) new pedestrian walkthrough gates to be installedgrind all welds smoothprime and paint all new fence to match existing on propertypour (6) new concrete pads for gate operatorsinstall (6) new eagle 200 swing gate operatorsinstall (8) new safety loopsinstall (4) new exit loopsinstall (4) new safety eyesinstall (4) new fireboxesinstall (2) new ak11 keypads on pedestrian gatesinstall (2) new mag locks on pedestrian gatesinstall (2) new exit buttons on pedestrian gateseast entrance electricalremove the existing house panel on building 18, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (4) dedicated 20 amp circuits from the house panel, up into the attic, over to the opposite end-of the building, and down to the base of the buildingbore under driveway in (2) locations to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (4) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorwest entrance electricalremove the existing house panel on building 1, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (2) dedicated 20 amp circuits from the house panel down to the base of the buildingbore under driveway in (1) location to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (2) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorclean and haul away all trash and debrisperimeter fence demolition and installation (east side of property)scope of work:demolition and remove approx 180' of existing 8' wood fenceinstall approx 210' of new 8' wrought iron fence with horizonal picketsset new 4" x 4" x 11' wrought iron post 36" below grade in sak-creteinstall new panels consisting of 2" x 2" top and bottom rails-with 3/4" x 3/4" pickets (same design as reflections new fence)grind all welds smoothprime and paint all new fence to match existing on propertyinstall new 6' horizonal pickets to metal panels (same design as reflections new fence)clean and haul away all trash and debris · 93 m away
- 7740 Mccallum BlvdFeb 12, 2026Gas leak detection and repair · 161 m away
- 7777 Mccallum BlvdFeb 13, 2026Gas leak has been detected, and possible repairs need to be made · 164 m away
- 16751 Cleary CirSep 23, 2026Replace existing upstairs hvac unit · 253 m away
- 17613 Coit RdApr 23, 202617613 coit building d install 20 concrete pilings to stabilize foundation · 264 m away
- 16738 Cleary CirJul 24, 202616738 cleary install 10 concrete pilings to stabilize foundation · 273 m away
- 16637 Coit RdJan 21, 2021Service release no work · 282 m away
- 16731 Coit RdSep 23, 2025Cut and remove existing pvc roof membrane. core cuts will be performed to identify potential areas of wet insulation. remove existing wall flashings to a workable surface and dispose of debris. remove existing perimeter metal edge and dispose of debris. install a layer of 1/2" hd iso roof board. this layer of roof board will be mechanically attached to the prepared substrate utilizing fm global (fm) approved fasteners and induction welding plates. install new roof membrane.install the new tpo membrane over the prepared surface. secure the membrane in place by welding it to the platesutilizing induction methodology. the thermoplastic membrane seams will be overlapped a minimum of 5", then hot air welded together. weld width shall be a minimum of 1.5" in width for automatic machine welding. weld width shall be 2" in width for hand welding. upon completion of welding, each seam shall be probed to ensure proper securement. install new wall flashings. install new perimeter metal edge · 287 m away
- 16714 Cleary CirJun 16, 2025Replace complete system · 320 m away
- 16726 Lauder LnOct 16, 20264-ton gas level 2 complete system replacement · 344 m away
- 16722 Lauder LnOct 21, 20264 ton hvac replacement · 362 m away
- 7739 Bantry LnSep 2, 2025Replace shower pan/shower valve · 389 m away