groundranger
Recent · latest filing Dec 2025Commercial

7825 Mccallum Blvd

Dallas, TX 75252

New perimeter fencing, gates and trash enclosure planned

Permits filed from September through December 2025 cover a trash enclosure with foundation work, trash-compactor connections, and replacement perimeter fencing and gates at 7825 McCallum Blvd. The fence permits, filed December 1 and December 22, describe new wrought-iron fencing, powered vehicle gates and pedestrian gates.

Summarized from City of Dallas records · updated Dec 22, 2025

Projects
4
4 filings
Latest filing
Dec 22, 2025
since Sep 23, 2025
Largest scope
—
Listed value
—

Permit & project history

4 projects
  1. Perimeter fence with entry and exit gate installationscope of work:demolition and remove approx 480' of existing 5' vinyl fencedemo and remove post and concreteset new 2" x 2" x 8' wrought iron post 24" below grade in sak-creteinstall new 6' wrought iron panels to new postpanels consist of 1-1/2" x 1-1/2" top and bottom rail and 3/4" x 3/4" picketsinstall new 4" x 4" x 10' wrought iron post 48" below grade in sak-cretecustom build new gates for specific openings to match perimeter fenceeast entry and exit gates to be double swing gates (4 gates total)west entry and exit gates to be single swing gates (2 gates total)(2) new pedestrian walkthrough gates to be installedgrind all welds smoothprime and paint all new fence to match existing on propertypour (6) new concrete pads for gate operatorsinstall (6) new eagle 200 swing gate operatorsinstall (8) new safety loopsinstall (4) new exit loopsinstall (4) new safety eyesinstall (4) new fireboxesinstall (2) new ak11 keypads on pedestrian gatesinstall (2) new mag locks on pedestrian gatesinstall (2) new exit buttons on pedestrian gateseast entrance electricalremove the existing house panel on building 18, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (4) dedicated 20 amp circuits from the house panel, up into the attic, over to the opposite end-of the building, and down to the base of the buildingbore under driveway in (2) locations to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (4) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorwest entrance electricalremove the existing house panel on building 1, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (2) dedicated 20 amp circuits from the house panel down to the base of the buildingbore under driveway in (1) location to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (2) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorclean and haul away all trash and debrisperimeter fence demolition and installation (east side of property)scope of work:demolition and remove approx 180' of existing 8' wood fenceinstall approx 210' of new 8' wrought iron fence with horizonal picketsset new 4" x 4" x 11' wrought iron post 36" below grade in sak-creteinstall new panels consisting of 2" x 2" top and bottom rails-with 3/4" x 3/4" pickets (same design as reflections new fence)grind all welds smoothprime and paint all new fence to match existing on propertyinstall new 6' horizonal pickets to metal panels (same design as reflections new fence)clean and haul away all trash and debris

    Perimeter fence with entry and exit gate installationscope of work:demolition and remove approx 480' of existing 5' vinyl fencedemo and remove post and concreteset new 2" x 2" x 8' wrought iron post 24" below grade in sak-creteinstall new 6' wrought iron panels to new postpanels consist of 1-1/2" x 1-1/2" top and bottom rail and 3/4" x 3/4" picketsinstall new 4" x 4" x 10' wrought iron post 48" below grade in sak-cretecustom build new gates for specific openings to match perimeter fenceeast entry and exit gates to be double swing gates (4 gates total)west entry and exit gates to be single swing gates (2 gates total)(2) new pedestrian walkthrough gates to be installedgrind all welds smoothprime and paint all new fence to match existing on propertypour (6) new concrete pads for gate operatorsinstall (6) new eagle 200 swing gate operatorsinstall (8) new safety loopsinstall (4) new exit loopsinstall (4) new safety eyesinstall (4) new fireboxesinstall (2) new ak11 keypads on pedestrian gatesinstall (2) new mag locks on pedestrian gatesinstall (2) new exit buttons on pedestrian gateseast entrance electricalremove the existing house panel on building 18, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (4) dedicated 20 amp circuits from the house panel, up into the attic, over to the opposite end-of the building, and down to the base of the buildingbore under driveway in (2) locations to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (4) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorwest entrance electricalremove the existing house panel on building 1, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (2) dedicated 20 amp circuits from the house panel down to the base of the buildingbore under driveway in (1) location to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (2) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorclean and haul away all trash and debrisperimeter fence demolition and installation (east side of property)scope of work:demolition and remove approx 180' of existing 8' wood fenceinstall approx 210' of new 8' wrought iron fence with horizonal picketsset new 4" x 4" x 11' wrought iron post 36" below grade in sak-creteinstall new panels consisting of 2" x 2" top and bottom rails-with 3/4" x 3/4" pickets (same design as reflections new fence)grind all welds smoothprime and paint all new fence to match existing on propertyinstall new 6' horizonal pickets to metal panels (same design as reflections new fence)clean and haul away all trash and debris

    City of Dallas permitCommercial Accessory Structure Permit
    Record
    COM-ACC-25-000229
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  2. Perimeter fence with entry and exit gate installationscope of work:demolition and remove approx 480' of existing 5' vinyl fencedemo and remove post and concreteset new 2" x 2" x 8' wrought iron post 24" below grade in sak-creteinstall new 6' wrought iron panels to new postpanels consist of 1-1/2" x 1-1/2" top and bottom rail and 3/4" x 3/4" picketsinstall new 4" x 4" x 10' wrought iron post 48" below grade in sak-cretecustom build new gates for specific openings to match perimeter fenceeast entry and exit gates to be double swing gates (4 gates total)west entry and exit gates to be single swing gates (2 gates total)(2) new pedestrian walkthrough gates to be installedgrind all welds smoothprime and paint all new fence to match existing on propertypour (6) new concrete pads for gate operatorsinstall (6) new eagle 200 swing gate operatorsinstall (8) new safety loopsinstall (4) new exit loopsinstall (4) new safety eyesinstall (4) new fireboxesinstall (2) new ak11 keypads on pedestrian gatesinstall (2) new mag locks on pedestrian gatesinstall (2) new exit buttons on pedestrian gateseast entrance electricalremove the existing house panel on building 18, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (4) dedicated 20 amp circuits from the house panel, up into the attic, over to the opposite end-of the building, and down to the base of the buildingbore under driveway in (2) locations to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (4) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorwest entrance electricalremove the existing house panel on building 1, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (2) dedicated 20 amp circuits from the house panel down to the base of the buildingbore under driveway in (1) location to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (2) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorclean and haul away all trash and debrisperimeter fence demolition and installation (east side of property)scope of work:demolition and remove approx 180' of existing 8' wood fenceinstall approx 210' of new 8' wrought iron fence with horizonal picketsset new 4" x 4" x 11' wrought iron post 36" below grade in sak-creteinstall new panels consisting of 2" x 2" top and bottom rails-with 3/4" x 3/4" pickets (same design as reflections new fence)grind all welds smoothprime and paint all new fence to match existing on propertyinstall new 6' horizonal pickets to metal panels (same design as reflections new fence)clean and haul away all trash and debris

    Perimeter fence with entry and exit gate installationscope of work:demolition and remove approx 480' of existing 5' vinyl fencedemo and remove post and concreteset new 2" x 2" x 8' wrought iron post 24" below grade in sak-creteinstall new 6' wrought iron panels to new postpanels consist of 1-1/2" x 1-1/2" top and bottom rail and 3/4" x 3/4" picketsinstall new 4" x 4" x 10' wrought iron post 48" below grade in sak-cretecustom build new gates for specific openings to match perimeter fenceeast entry and exit gates to be double swing gates (4 gates total)west entry and exit gates to be single swing gates (2 gates total)(2) new pedestrian walkthrough gates to be installedgrind all welds smoothprime and paint all new fence to match existing on propertypour (6) new concrete pads for gate operatorsinstall (6) new eagle 200 swing gate operatorsinstall (8) new safety loopsinstall (4) new exit loopsinstall (4) new safety eyesinstall (4) new fireboxesinstall (2) new ak11 keypads on pedestrian gatesinstall (2) new mag locks on pedestrian gatesinstall (2) new exit buttons on pedestrian gateseast entrance electricalremove the existing house panel on building 18, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (4) dedicated 20 amp circuits from the house panel, up into the attic, over to the opposite end-of the building, and down to the base of the buildingbore under driveway in (2) locations to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (4) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorwest entrance electricalremove the existing house panel on building 1, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (2) dedicated 20 amp circuits from the house panel down to the base of the buildingbore under driveway in (1) location to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (2) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorclean and haul away all trash and debrisperimeter fence demolition and installation (east side of property)scope of work:demolition and remove approx 180' of existing 8' wood fenceinstall approx 210' of new 8' wrought iron fence with horizonal picketsset new 4" x 4" x 11' wrought iron post 36" below grade in sak-creteinstall new panels consisting of 2" x 2" top and bottom rails-with 3/4" x 3/4" pickets (same design as reflections new fence)grind all welds smoothprime and paint all new fence to match existing on propertyinstall new 6' horizonal pickets to metal panels (same design as reflections new fence)clean and haul away all trash and debris

    City of Dallas permitResidential Accessory Structure Permit
    Record
    RES-ACC-25-000892
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  3. 250 amp service hook up trash compactor

    250 amp service hook up trash compactor

    City of Dallas permitCommercial Electrical Permit
    Record
    COM-ELC-25-002443
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  4. Mcr installing trash enclosure with foundation work.200 amp service 200 amp panel hook up 2-equipment for trash compactors

    Mcr installing trash enclosure with foundation work.200 amp service 200 amp panel hook up 2-equipment for trash compactors

    City of Dallas permitCommercial Alteration Addition Permit
    Record
    COM-ALT-ADD-25-001223
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro

Sources: City of Dallas

Questions about 7825 Mccallum Blvd

What is being built at 7825 McCallum Blvd?

Permits indicate plans for a trash enclosure with foundation work, trash-compactor connections, and new perimeter fencing and gates. The fence work includes wrought-iron panels, vehicle gates and pedestrian gates.

When were permits filed for work at 7825 McCallum Blvd?

The listed permits were filed between September 23 and December 22, 2025. Fence and gate permits were filed December 1 and December 22.

What fence work is planned at 7825 McCallum Blvd?

Permits describe removing sections of existing vinyl and wood fencing and installing wrought-iron fencing. The scope includes about 210 feet of new 8-foot fence along the east side.

Are new gates planned at 7825 McCallum Blvd?

Yes. The December 2025 fence permits describe vehicle entry and exit gates, two pedestrian gates, and operators and electrical work for the gates.

Is a trash enclosure being added at 7825 McCallum Blvd?

A September 23, 2025, commercial alteration permit describes installing a trash enclosure with foundation work. It also lists a 200-amp service and panel for trash-compactor equipment.

What permits cover the trash compactor work at 7825 McCallum Blvd?

Permit COM-ALT-ADD-25-001223, filed September 23, 2025, covers the trash enclosure and connections for compactor equipment. Permit COM-ELC-25-002443, filed September 29, describes a 250-amp service hookup for a trash compactor.

Also being built nearby

All of 75252

More demolitions in 75252.

Get alerts for 7825 Mccallum Blvd