16731 Coit Rd
Dallas, TX 75248
Roof membrane replacement at 16731 Coit Road
A commercial roofing permit filed September 23, 2025, covers removal of the existing roof membrane and installation of a new TPO membrane at 16731 Coit Road. The work also includes new roof board, wall flashings and perimeter metal edging.
Summarized from City of Dallas records · updated Sep 23, 2025
- Projects
- 2
- 2 filings
- Latest filing
- Sep 23, 2025
- since Sep 23, 2025
- Largest scope
- —
- Listed value
- —
Permit & project history
2 projectsCut and remove existing pvc roof membrane. core cuts will be performed to identify potential areas of wet insulation. remove existing wall flashings to a workable surface and dispose of debris. remove existing perimeter metal edge and dispose of debris. install a layer of 1/2" hd iso roof board. this layer of roof board will be mechanically attached to the prepared substrate utilizing fm global (fm) approved fasteners and induction welding plates. install new roof membrane.install the new tpo membrane over the prepared surface. secure the membrane in place by welding it to the platesutilizing induction methodology. the thermoplastic membrane seams will be overlapped a minimum of 5", then hot air welded together. weld width shall be a minimum of 1.5" in width for automatic machine welding. weld width shall be 2" in width for hand welding. upon completion of welding, each seam shall be probed to ensure proper securement. install new wall flashings. install new perimeter metal edge
Cut and remove existing pvc roof membrane. core cuts will be performed to identify potential areas of wet insulation. remove existing wall flashings to a workable surface and dispose of debris. remove existing perimeter metal edge and dispose of debris. install a layer of 1/2" hd iso roof board. this layer of roof board will be mechanically attached to the prepared substrate utilizing fm global (fm) approved fasteners and induction welding plates. install new roof membrane.install the new tpo membrane over the prepared surface. secure the membrane in place by welding it to the platesutilizing induction methodology. the thermoplastic membrane seams will be overlapped a minimum of 5", then hot air welded together. weld width shall be a minimum of 1.5" in width for automatic machine welding. weld width shall be 2" in width for hand welding. upon completion of welding, each seam shall be probed to ensure proper securement. install new wall flashings. install new perimeter metal edge
City of Dallas permitCommercial Roofing Permit
Sources: City of Dallas
Questions about 16731 Coit Rd
What is being built at 16731 Coit Road?
The City of Dallas permit describes a roof replacement, including a new TPO membrane, roof board, wall flashings and perimeter metal edging. It was filed September 23, 2025.
Is 16731 Coit Road getting a new roof?
Yes. Permit COM-ROOF-25-000131 covers removing the existing PVC roof membrane and installing a new TPO membrane.
When was the roofing permit filed for 16731 Coit Road?
The City of Dallas filed commercial roofing permit COM-ROOF-25-000131 on September 23, 2025.
What kind of roofing is planned at 16731 Coit Road?
The permit specifies a TPO roof membrane installed over a layer of 1/2-inch HD ISO roof board. It also calls for new wall flashings and perimeter metal edging.
How much will the roof work at 16731 Coit Road cost?
The available permit record does not list a project valuation or estimated cost.
Also being built nearby
All of 75248- 16637 Coit RdJan 21, 2021Service release no work · 9 m away
- 7825 Mccallum BlvdDec 22, 2025Perimeter fence with entry and exit gate installationscope of work:demolition and remove approx 480' of existing 5' vinyl fencedemo and remove post and concreteset new 2" x 2" x 8' wrought iron post 24" below grade in sak-creteinstall new 6' wrought iron panels to new postpanels consist of 1-1/2" x 1-1/2" top and bottom rail and 3/4" x 3/4" picketsinstall new 4" x 4" x 10' wrought iron post 48" below grade in sak-cretecustom build new gates for specific openings to match perimeter fenceeast entry and exit gates to be double swing gates (4 gates total)west entry and exit gates to be single swing gates (2 gates total)(2) new pedestrian walkthrough gates to be installedgrind all welds smoothprime and paint all new fence to match existing on propertypour (6) new concrete pads for gate operatorsinstall (6) new eagle 200 swing gate operatorsinstall (8) new safety loopsinstall (4) new exit loopsinstall (4) new safety eyesinstall (4) new fireboxesinstall (2) new ak11 keypads on pedestrian gatesinstall (2) new mag locks on pedestrian gatesinstall (2) new exit buttons on pedestrian gateseast entrance electricalremove the existing house panel on building 18, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (4) dedicated 20 amp circuits from the house panel, up into the attic, over to the opposite end-of the building, and down to the base of the buildingbore under driveway in (2) locations to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (4) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorwest entrance electricalremove the existing house panel on building 1, then install a larger 12 space house panel to-accommodate additional circuitry for gate operatorsrun (2) dedicated 20 amp circuits from the house panel down to the base of the buildingbore under driveway in (1) location to create a pathway for conduit to be ranhand trench then run underground conduit and wire from the base of the building to the location-of (2) gate operators (1) pedestrian gateinstall junction boxes at the base of each operator, make all required connections, then energize new-circuits and confirm proper voltage to each operatorclean and haul away all trash and debrisperimeter fence demolition and installation (east side of property)scope of work:demolition and remove approx 180' of existing 8' wood fenceinstall approx 210' of new 8' wrought iron fence with horizonal picketsset new 4" x 4" x 11' wrought iron post 36" below grade in sak-creteinstall new panels consisting of 2" x 2" top and bottom rails-with 3/4" x 3/4" pickets (same design as reflections new fence)grind all welds smoothprime and paint all new fence to match existing on propertyinstall new 6' horizonal pickets to metal panels (same design as reflections new fence)clean and haul away all trash and debris · 240 m away
- 17613 Coit RdApr 23, 202617613 coit building d install 20 concrete pilings to stabilize foundation · 274 m away
- 7780 Mccallum BlvdMay 14, 2026Unit #2212/ electrical release no work · 287 m away
- 16738 Cleary CirJul 24, 202616738 cleary install 10 concrete pilings to stabilize foundation · 297 m away
- 16751 Cleary CirSep 23, 2026Replace existing upstairs hvac unit · 302 m away
- 8060 Sarahville DrFeb 11, 2026Replace all plumbing, gas · 308 m away
- 8060 Sarahville DrJan 21, 2026Remodeling/addition - complete installation for two a/c systems, 3 ton and 5 ton (electric) · 308 m away
- 16714 Cleary CirJun 16, 2025Replace complete system · 317 m away
- 17114 Bullaye WayNov 3, 2025Re-roof due to storm damage · 354 m away
- 17114 Bullaye WayMar 2, 2026Roof replacement · 354 m away
- 17122 Bullaye WayDec 8, 2025Electrical work for patio cover · 360 m away