groundranger
Recent · latest filing Dec 2025Commercial

11835 Greenville Ave

Dallas, TX 75243

Roof overlay permitted for three buildings at 11835 Greenville Ave

A commercial roofing permit filed December 3, 2025, covers roof overlays on three buildings at 11835 Greenville Ave. The work includes replacing sections of wet insulation, installing new 60-mil TPO membranes and related flashing and edge details; the roof decks are not being removed.

Summarized from City of Dallas records · updated Dec 3, 2025

Projects
6
6 filings
Latest filing
Dec 3, 2025
since Dec 3, 2025
Largest scope
—
Listed value
—

Permit & project history

6 projects
  1. Building 1: remove the existing tpo membrane as needed to replace insulation. replace approximately 2,690 sq ft of wetted insulation found during the moisture survey with an average thickness of 4 inches, and install new poly iso as needed to fill.install a 0.5 inch eps fanfold cover board over the entire roof surface, which ensures a protective surface for the new membrane while adding additional insulation.install new flashings on all penetrations.install new 24-gauge drip edge along eaves. detach and reset the existing parapet coping metal with the new termination bar.adhere the new tpo to the front parapet wall.install new 60-mil tpo membrane mechanically attached per manufacturer's specifications.building 2:clean the existing modified bitumen roof system of loose debris.replace approximately 469 sq ft of wetted insulation found during the moisture survey with an average thickness of 2 inches.install a 0.5” eps fanfold cover board over the entire roof surface, which ensures a protective surface for the new membrane while adding additional insulation.install new flashings on all penetrations.install new 24-gauge drip edge along eaves. install tapered insulation 8 feet out from the front parapet wall to promote positive drainage.remove xl abandoned satellite dish and dispose.replace existing parapet coping metal due to poor condition - pre-finished.install new 60-mil tpo membrane mechanically attached per manufacturer's specifications.building 3:clean the existing modified bitumen roof system of loose debris.replace approximately 289 sq ft of wetted insulation found during the moisture survey with an average thickness of 2 inches, and install new poly iso insulation as needed to fillinstall a 0.5” eps fanfold cover board over the entire roof surface, which ensures a protective surface for the new membrane while adding additional insulation.install new flashings on all penetrations.install new 24-gauge drip edge along eaves. replace existing parapet coping metal due to poor condition - pre-finished.install new 60-mil tpo membrane mechanically attached per manufacturer's specifications.this scope does not include removing the roof to the deck - it is an overlay. the deck/substrate will not be removed during the overlay process, we are only removing and replacing specific areas of insulation that are saturated with moisture, as required by the manufacturer

    Building 1: remove the existing tpo membrane as needed to replace insulation. replace approximately 2,690 sq ft of wetted insulation found during the moisture survey with an average thickness of 4 inches, and install new poly iso as needed to fill.install a 0.5 inch eps fanfold cover board over the entire roof surface, which ensures a protective surface for the new membrane while adding additional insulation.install new flashings on all penetrations.install new 24-gauge drip edge along eaves. detach and reset the existing parapet coping metal with the new termination bar.adhere the new tpo to the front parapet wall.install new 60-mil tpo membrane mechanically attached per manufacturer's specifications.building 2:clean the existing modified bitumen roof system of loose debris.replace approximately 469 sq ft of wetted insulation found during the moisture survey with an average thickness of 2 inches.install a 0.5” eps fanfold cover board over the entire roof surface, which ensures a protective surface for the new membrane while adding additional insulation.install new flashings on all penetrations.install new 24-gauge drip edge along eaves. install tapered insulation 8 feet out from the front parapet wall to promote positive drainage.remove xl abandoned satellite dish and dispose.replace existing parapet coping metal due to poor condition - pre-finished.install new 60-mil tpo membrane mechanically attached per manufacturer's specifications.building 3:clean the existing modified bitumen roof system of loose debris.replace approximately 289 sq ft of wetted insulation found during the moisture survey with an average thickness of 2 inches, and install new poly iso insulation as needed to fillinstall a 0.5” eps fanfold cover board over the entire roof surface, which ensures a protective surface for the new membrane while adding additional insulation.install new flashings on all penetrations.install new 24-gauge drip edge along eaves. replace existing parapet coping metal due to poor condition - pre-finished.install new 60-mil tpo membrane mechanically attached per manufacturer's specifications.this scope does not include removing the roof to the deck - it is an overlay. the deck/substrate will not be removed during the overlay process, we are only removing and replacing specific areas of insulation that are saturated with moisture, as required by the manufacturer

    City of Dallas permitCommercial Roofing Permit
    Record
    COM-ROOF-25-000185
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  2. Service release no work

    Service release no work

    City of Dallas permitElectrical (EW) Commercial Alteration
    Record
    2001301059
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  3. Erect detached sign

    Erect detached sign

    City of Dallas permitElectrical Sign Alteration
    Record
    1912231048
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  4. Erect detached sign

    Erect detached sign

    City of Dallas permitElectrical Sign Alteration
    Record
    1908011082
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  5. Erect attached sign

    Erect attached sign

    City of Dallas permitElectrical Sign New Construction
    Record
    1908011081
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro
  6. Erect attached sign

    Erect attached sign

    City of Dallas permitElectrical Sign New Construction
    Record
    1908011079
    Tenant / owner
    Pro
    Contractor
    Pro
    Contact
    Pro

Sources: City of Dallas

Questions about 11835 Greenville Ave

What is being built at 11835 Greenville Ave?

A December 3, 2025, commercial roofing permit covers roof overlays on three buildings, including new 60-mil TPO membranes and replacement of some wet insulation.

Is a new building going up at 11835 Greenville Ave?

The permit describes roofing work on three existing buildings, not construction of a new building.

When was the roofing work at 11835 Greenville Ave permitted?

The City of Dallas permit was filed December 3, 2025. Its permit number is COM-ROOF-25-000185.

Are the roofs at 11835 Greenville Ave being removed?

No. The permit describes the work as an overlay and says the roof decks will not be removed.

What roofing materials are specified for 11835 Greenville Ave?

The permit specifies new mechanically attached 60-mil TPO membranes, along with cover board, flashing and drip edge. It also calls for replacing specified areas of moisture-damaged insulation.

Also being built nearby

All of 75243

More restaurants in 75243.

Get alerts for 11835 Greenville Ave